LS LISLE LS39550 36MM Axle Nut Socket
$24.00Features FWD Axle Nut Socket (36mm) For All 36mm Axle Nuts. Durable,impact-grade material. Deep to fit over variable axle lengths. Works where standard sockets won’t.
USA Free Shipping on orders of $140.00 or more
Showing 101–120 of 185 results
Features FWD Axle Nut Socket (36mm) For All 36mm Axle Nuts. Durable,impact-grade material. Deep to fit over variable axle lengths. Works where standard sockets won’t.
Features Disconnects spring lock couplings on Ford andChrysler AC lines. Works on fuel lines and other quickdisconnect couplingson domestic and import vehicles.The handles are angled to access tight spots. Made ofdurable plastic thatresists fuels and solvents. Sixsizes: 5/16″,3/8″, 1/2″, 5/8″, 3/4″ and 7/8″.All disconnects available individually skin-packed.
Features Disconnects the 5/16″ Main Fuel Line from theFuel Rail on Many Toyota and Nissan Vehicles.Hinged design and fully tapered end allow tool to be quicklyand easily inserted into fuel line quick connector, even inhard-to-reach areas. Works on Toyota Echo, Scion xB, xA,TC, Solara, Corolla, Sequoia, Celica, RAV 4, Prius, Camry,MR2, Matrix, Tundra and Highlander….
Features Disconnects the Heater Hose Fittings on 2012- 2016 Ford Focus 2.0L and 2013-2016 Ford Escape 2.0L EcoBoost?. These type of fittings are close to the firewall behind the engine and are difficult to turn with very little to hang onto to rotate. They only get worse over time with each heat cycle and deposit…
Designed to Separate Quick-Connect Fittings on 3/4″ Heater Lines on GM Vehicles. Hinged design allows the tool to slip over the heater hose, even in tight spaces. Slide the tool into the connector to release the line. Aluminum provides strength and durability.
Features Compact Tool Design Fits Tight Spaces. Two sizes, 3/8” and 5/16” are designed to release thenylon retaining clip used on the fuel lines of newer GM andChrysler vehicles with electric fuel pumps.
Features The exhaust plier works on all import and domestic car andtruck exhaust systems that use the rubber hanger supports.Simply squeeze the plier handles to force the bracket fromthe rubber support.
Features DodgeSeparates the Frozen Hub Assembly from theSteering Knuckle on Dodge Vehicles.Tool drives against loosened retaining bolts to separateassembly. Prevents damage to the knuckle and completehub assembly. Tool drives on the bolt flange, so the headof the retaining bolt is not destroyed. Kit contains 39300forolder, smaller applications and 39250 for 2003 and newer4-wheel drive 3/4…
Features For Use When Servicing the Timing Chain on GM 2.8, 2.9,3.0, 3.5, 3.6, 3.7, and 4.2L Engines. Helps Ensure Camshaft Alignment During Timing ChainRemoval and Installation. Plates 1, 2 and 3 work on 2.8L, 3.0L and 3.6L highfeature V6 engines. Plate 4 works on ?04-?07 2.8L, ?07-?12 2.9L, ?04-?063.5L, ?07-?12 3.7L & ?02-?08 4.2L…
Features Used on 98 and later full size pickups, Suburban and TahoeFits both 3/8 and 5/16 connector sizes
Features For Servicing the Timing Belt, Chains, Head Gaskets or OtherValve Train Repairs on Ford, Mercury and Mazda Vehicles. The kit comes with an aluminum camshaft holding bar,plus one short top dead center (TDC) timing pin and one longTDC timing pin.The camshaft bar and long TDC timing pin are used on2.0L DOHC Zetec engines found…
Features Set of six tools which disconnect the spring lockcouplings on Ford and Chrysler air conditioning line. Also works on fuel line quick connect couplings found onGM, Ford, and Chrysler . sconnect the spring lockcouplings on Ford and Chrysler air The 5/16″ size fits on push lock connectors found onFord radiators and transmission lines. ouplings…
Features This versatile tool easily locks and holds both camshaftsprockets firmly in place. Unique design uses knurled pinsto hold against the inside of the cam sprockets. The twoparallel bars ?float” which allows the knurled pins to alignwith the sprockets. Preserves the engine timing during beltor chain replacement.
Features Quickly Removes and Installs Valve KeepersOn Most Overhead Valve Engines With ValveStems From 4.5 to 7.5mm and 5/16″ to 3/8″.Makes valve component disassembly and reassembly fastand easy. Can be used on the car or bench. New smaller sizeworks on Toyota four cylinder and Chrysler New World Engineapplications. Magnet in tool body captures keepers for…
Features Used On Most CAT, Cummins and DetroitDiesel Engines (Class 7 and 8 Trucks).The double-sided centering bushing guides the seal driver sothat seals can be easily installed straight into therecessedport in the thermostat housing. For seals without a stopflange, the handle provides the stop to install the seal tothecorrect depth in the housing.
Features Thin Tips on this Double-Ended Tool ProvideEasy Access When Removing Plastic Clips. Smaller opening works for lifting the center pin and thewider opening lifts the fastener from the panel. Also workson mostplastic fasteners, plastic clips, upholstery or doorpanels. Zinc finish with 3-1/2″ grip. Overall tool length is 8″.
Features Door Upholstery Remover For Plastic Fasteners. Place the tool under the edge of the door panel and insert into fasteneras far as possible…then simply pry up. Rugged tool with alarge comfortable handle.
Features Narrow Tip with V Groove for Removing Plastic Clips Used onUpholstery, Door Panels, Radiator Shrouds, Fender Liners andWeather Stripping. The tool is equipped with a sliding urethane bumper foruse when extra leverage is necessary. Also use the bumper toprotect the vehicle surface.
Features Removes Plastic Hold-Down Fasteners.This tool quickly removes various types of plastic fastenersthat hold on weather stripping, radiator shrouds, fenderlinings, air dams and other plastic or rubber parts. Thetool is equipped with a sliding urethane button for use whenextra leverage is necessary.
Features Unique Flared Head Design and Beveled Edges Allow the Toolto be Inserted Under the Molding at an Angle. Makes removal of newer belt moldings easy. Quicklyremoves belt molding without damage. For clipless moldings, the tool is twisted or pulledback to release the molding from the door tab. For moldings with metal clips, hook the…