Showing 1–20 of 74 results
-
OT OTC OT7947 Silver Slapper Puller Set in Storage Case
$247.00Features Use for 2/3-way internal or external jobs. Attachments include a dent puller, internal/externalpulling jaws, puller hook attachment, rear axle pullingattachment, and more. Comes neatly packaged in a handy storage case.
-
MU MUELLER-KUEPS MU609400-460 Press And Pull Sleeve Combination Kit
$772.00Features 20 sleeves / 4 Discs Sleeves can be stacked Diameter Range: 1-3/4″ to 3-3/8″ Including XL C-Clamp Includes “Vibro-Impact” Tool, allowing the use of animpact wrench Remove/Install: silent bearings, hydraulic bearings,ball bearings, rubber bearings, shaft seals, bearing brush,etc. Comes in a convenient carry case.
-
MU MUELLER-KUEPS MU609400 Press And Pull Sleeve Kit
$562.00Features Universal Tool set for extracting and mounting: silentbearings, hydraulic bearings, ball bearings, rubberbearings, shaft seals, bearing brush, etc. Universal application makes it ideal for variousvehicles. Includes: 20 sleeves, 4 spindle, 4 discs Used for easy bearing extraction or mounting on almostany type of car Use this universal tool set for extracting and mountingthe following:…
-
MU MUELLER-KUEPS MU609390 XS Press And Pull Sleeve Kit
$531.00Features Universal Tool set for extracting and mounting: silentbearings, hydraulic bearings, ball bearings, rubberbearings, shaft seals, bearing brush, etc. Includes: 10 sleeves, 3 spindle, 4 discs
-
MU MUELLER-KUEPS MU433414 Uni Drive Shaft Pusher / HUB Puller
$265.00Features Damage to the drive shaft thread is prevented. Suitable for almost 4- and 5-hole wheel HUBs with apitch circle diameter up to 136 mm. The “VIBRO-IMPACT” principle: the vibration impact ofthe pneumatic wrench is transmitted to the wheel HUB and tothe drive shaft through the trapezoidal thread spindle. When used in conjunction with the…
-
AO ASTRO PNEUMATIC AO7874 Power Steering Pulley Puller Kit
$26.00Features Removes pressed-on alternator and power steeringpulleys on late model GM, Ford and Chrysler engines Installs late model GM alternator and power steeringpulleys including Quad 4
-
TA TOOL AID TA66370 10LBS Front Wheel and Hub Puller Set
$166.00Features Heavy duty 10 lb. Slide Hammer on Steel Shaft reduceseffort, time and labor to make a tough job easy. Pullers fit 4, 5 and 6 bolt patterns for use on mostdomestic and imported cars and light trucks. Easily removes front wheel hubs and flange typerear axles. Axle and Hub Pulling Adapter accepts other 5/8?-18female…
-
TA TOOL AID TA66350 Front Wheel Hub Puller
$43.00Features Separates the front hub from the axle on front wheel drivecars. Can be used with any slide hammer having a 5/8?-18 malethread or the included 5/8?-18 x 5 1/2? long Forcing Screw. Hex Nut makes using with a standard slide hammer easy.
-
TA TOOL AID TA66340 Slide Hammer Axle and Hub Puller Adapter
$109.00Features Combination 10 lb. Slide Hammer and Hub Puller makesremovingaxles and hubs easy. Comes complete with flanged PullingYoke. Use toremove front and rear wheel drive axles. Can be used toremove flange typerear axles. The extra heavy 10 lb. weight reduces time andlabor to make toughjobs easy. Vinyl handle provides for positive grip and shockcushioning. Slideweight…
-
TA TOOL AID TA66330 Pulling Yoke
$43.00Features Use with slide hammer to remove rear axles on popular carsand mosttrucks with flange type axles. The bolt circle range is41/2? to 51/2?. Slots permituse on axles with 4, 5 or 6 studs in the circle. Suppliedwith 5/8?-18 lock nut.
-
TA TOOL AID TA66320 Axle and Hub Puller Adaptor
$46.00Features Convert your Cat. Nos. 80000, 81000 & 81100 to a SlideHammerAxle & Hub Puller. Adapter accepts 5/8?-18 female threadedpulling attachments.Thread onto Slugger shaft or any shaft having a 3/4? NPSMthread to pull axlesand hubs with ease. Solid steel construction. This is sameadapter suppliedwith Cat. No. 66340. Replaceable bolt, nut and lock washer.
-
-
OT OTC OT7927A Steering Wheel Remover/Lock Plate Compressor Set
$99.00Features Included with the puller are four sets of cap screwsneeded for the various thread requirements. A steering wheel lock plate compressor is also includedto compress the steering wheel lock plate to remove orinstall the snap ring. A steering pivot pin remover for Saginaw steeringcolumns completes the set, and it all comes in a convenientplastic…
-
OT OTC OT7793 Master Bolt Grip Puller Kit
$184.00Features OTC Version of popular Mobile Bolt Grip Kit Grade 8 Bolts – Snap Fit Storage CaseSet includes the following all packaged in a convenient blowmolded case: One heavy duty, forged, three way puller flange Two different length live center forcing screws Four live center adapters Eleven sets of heavy duty, washer head, hardened steelbolts…
-
OT OTC OT7497A Rear Axle Bearing Puller
$55.00Features Rear axle bearing puller. Fits min. bearing tube I.D. of1-3/8 in. and Max. axle tube I.D. of 2-7/8″
-
OT OTC OT7318 Pilot Bearing Puller
$121.00Features Designed to pull flywheel pilot bearings in closequarters where a slide hammer cannot be used. Operates onmany models with engine in chassis. Capacity: 1/2″ to 1-1/2″. I.D. reach 3/4″.
-
OT OTC OT7185 Power Steering Pump Pulley
$55.00Features # Removes power steering pulleys on most Ford, Chrysler, VW,and GM vehicles with Saginaw, Thompson, and Ford C2 and C111power steering.# Similar to Ford No. 211-016.
-
OT OTC OT6701 Pitman Arm Puller Set
$284.00Features This set contains three pitman arm pullers for a wide rangeof applications from 1993 and later GM, Ford, Dodge and Jeepapplications. Includes OTC 8150 conical pitman arm puller, 6496compact pitman arm puller and 6497 super-duty pitman armpuller.
-
OT OTC OT6669 Harmonic Balancer Puller Kit
$113.00Features Designed for removing the harmonic balancer in tightengine compartments without removing the radiator. This kit includes an extra set of jaws to cover moreapplications and vehicles. Kit also contains the 3-jaw puller, four lengths offorcing rods, and a forcing screw with a 3/8″ internalsquare drive for ratchet use, and a 3/4″ external hex forwrench…
-
OT OTC OT6667 Harmonic Balancer Puller
$109.00Features Designed for removing damper pulleys in tight enginecompartments,without removing the radiator. Use on the following: GM 2000 Generation III 4.8L, 5.3L, 5.7L 6.0L, and 8.1LV8s.Also works on Cadillac 4.5, 4.6, and 4.9L V8s beginning in1988. Chevrolet trucks 2003-later 4.2L I6, 2004-current 3.5LI5and 2005-current 2.8L I4. Chrysler engines from 1990-later, including 2.0L,2.4L-4s; plus 2.5L, 2.7L,…
English
Arabic
Chinese (Simplified)
Dutch
French
German
Italian
Portuguese
Russian
Spanish