Showing 61–80 of 185 results
-
$182.00
Features Removes Most Automotive Harmonic Balancers. The kit includes a standard harmonic balancer puller,pullingscrews, adapters for 3300 and 3800 GM V6 engines, and aHarmonic Damper Pulley Puller for Chrysler, GM, Mitsubishi,& Dodge. Includes new interchangeable puller jaws for 3.6LV6 Chevrolet Camaro and Dodge 5.7L Hemi.
-
$13.00
Features Spark Plug Pliers Two Pulling Positions Help Make Removing Spark Plug Wires A Safe And Easy Job. Specially shaped, cushioned jaws grip the boot straighton or from the side. Plastic handle grips help preventshock.
-
$11.00
Features 3 Pieces of replacement padsfor 52600
-
$14.00
Features Razor Blade Scraper At last, a scraper that is designed to reach in tight places. Comes with five stainless steel bladesfor removing stickers from windshields, bumpers, etc.
-
$21.00
Features Separates Spot Welded Panels. Use to Separate Panels After the Spot Weld Has BeenDrilled Out. Drive the blade with a hammer from the top or the sidethrough the panel. Panels are separated without damage. The blade is sharpened on three sides and offset forclearance.
-
$8.00
Features A handy tool to check ignition spark without removing thespark plug. The tool is specially calibrated to measureignition voltage. Works on both standard and electronicignition systems. Easy to use. Simply adjust calibrationscrew to proper gap size. Attach spark plug wire to end oftester. Clamp tester on engine to ground. Crank engine andcheck for spark.
-
$98.00
Features Coil and Uncoil Your Air Hose Neatly and Quickly to PreventDamage.The Side Winder Air Hose Reel provides a large 10″ diameterreel to prevent tight coils in your air hose. Two built-intool hangers keep your air chuck, blow gun or other airtools handy. The constant supply 1/4″ NPT brass swivel keepsair flowing freely and handles…
-
$18.00
Features Strong Magnet Attaches to Ferrous Metal Surfaces to KeepMost 3/8″ to 1/2″ Shop Air Hoses off the Floor, Clean andccessible. Bright powder coat finish for visibility and durability. The tool can also be permanently mounted with screws.
-
$18.00
Features Strong Magnet Attaches to Ferrous Metal Surfaces to KeepMost 3/8″ to 1/2″ Shop Air Hoses off the Floor, Clean andccessible. Bright powder coat finish for visibility and durability. The toolcan also be permanently mounted with screws.
-
$21.00
Features Offset Handle for Extra Clearance and Two Double Ended Tipsto Fit Most Applications. Offset design provides installers extra clearance towork on windshields or other glass on semis, skid loadersand agricultural applications with locking strips
-
$18.00
Features Works on Newer 3.5L and 3.6L GM Engines. Also Works on GM V62.8L, 3.1L and 3.4L. Quickly removes push rods so you can replace the intakegasket. No need to loosen and retighten the rocker arm. Thetool pivots the rocker arm to compress the valve spring andfree the push rod for removal.
-
$49.00
Features Includes a Support to Help Prevent Slipping.The tool includes our standard -45900 Hood Prop plus asupport to help prevent the bottom of the tool fromslipping.The three piece telescoping shaft locks in any position tohold hood to the desired height. The tool with the supporttelescopes from 20″ to 18 1/4″. Place the support over ahood…
-
$45.00
Features Works on All Makes of Cars and Trucks.The three-piece, telescoping design allows the mechanic tohold the hood in the desired position. The tool telescopesfrom 18 1/2″ to 46 3/4″. Can be used from the side of carfor better access to the engine compartment. Also great forbody or repair work on door, trunk lids, or…
-
$81.00
Features Includes an Additional 1 1/2? Crows Foot forChevrolet Colorado and GMC Canyon.Works on tie rods with inaccessible flats. Many inner tierodend sockets do not have a complex hex on the full length ofthe socket. The rounded socket ends prevent access to thewrench flats. This tool utilizes six crows feet to engagethewrench flats. Long socket…
-
$24.00
Features Tool are used to relieve clamp spring pressure in very tightspots.Vise is often left in place, with the clamp compressed,duringservice. Ramp on jaws guides tab of clamp into correctposition andtraps it in the slot for safety. Tighten knurled knob byhand or use1/4″ drive ratchet. Compact design works great in confinedspaces.The small size works especially…
-
$26.00
Features Tool are used to relieve clamp spring pressure in very tightspots.Vise is often left in place, with the clamp compressed,duringservice. Ramp on jaws guides tab of clamp into correctposition andtraps it in the slot for safety. Tighten knurled knob byhand or use1/4″ drive ratchet. Compact design works great in confinedspaces.The small size works especially…
-
$42.00
Features For GM, Jeep and Dodge Trucks, Vans andSUVs With Pressed on Water Pump Pulleys.The double-ended spanner wrench fits the holes inpressed-on water pump pulleys. Hold the pulley firm withthe spanner wrench. Use the appropriate open end wrenchto turn the fan clutch nut (41740 36mm turning wrenchworks on many applications)
-
$85.00
Features For Removing and Installing Pressed and Bolt-on WaterPump Pulleys. Use with 1/2″ ratchet or other square drive forflexibility in tight spaces. 43580 is a double-sided tool that fits GM gas engines2000 and newer, Jeep and Dodge 2000 and newer except 2009and newer Hemi. 43840 works on 2009 and newer Dodge Hemi. 43860 fits 2001-2013…
-
$140.00
Features Does the job much faster and easier than conventional fanclutch wrenches. No holding wrench is necessary. The setincludes 7 driving wrenches that fit Ford, GM and Chrysler.Driving wrench sizes include: 36mm, 1 1/2″, 1 9/16″, 41mm,42mm, 1 7/8″ and 2″. Use with an air hammer.
-
$137.00
Features Quickly and Easily Removes Sealed U-Joint Caps withoutDamage to Driveshafts, Yokes or Bearing Caps. Work on Class 7 and 8 trucks with 1.5″ to 2.2″ bearingcaps. Heat-treated threads and casting for durability.