Showing 1–20 of 25 resultsSorted by popularity
-
Milwaukee M12 12-Volt Lithium-Ion Cordless Variable Speed Polisher Sander (Tool-Only) 2438-20
$169.00Featuring Dual Mode Control and a variable speed trigger, the M12™ Polisher/Sander delivers increased user control, regardless of the application.
- Power Source: Cordless
- Length: 5.1″
- Weight: 1.58 lbs
- Battery: M12™ REDLITHIUM™
- Charger: M12 Charger
- Sanding RPM: 0-8,300 RPM
- Polishing RPM: 0-2,800 RPM
- Voltage: 12V
- Battery System: M12
-
ARC AIRCAT ARC6320 Air Spot Sander
$138.00Features Weighing in at only 1.1 lbs and measuring only 6.1 inches inlength, the 6320 is perfect for finish work and spot sanding/ polishing.. 1/8? orbital head provides ultra-fine sanding andpolishing. Spindle-counter balance reduces vibration levels to1.8m/sec and adds reliability, while the precision alloysteel spiral bevel gears extend tool life. Low weight composite grip provides…
-
IR INGERSOLL RAND IR4151 Vacuum Ready Air Random Orbital Sander
$170.00Features The 4151 sets a new standard in elite automotive finishwork. This fine 3/16″ orbit, vacuum-ready, low-vibrationsander helps users acheive high-quality paint finishes. The4151 utilizes a precision ground counterbalance to reducevibration. The 4152 extracts dust and particles through andaround the pad, keeping foreign matter away from the motor.Virtually all dust is instantly chanelled away from…
-
IR INGERSOLL RAND IR345MAX 5″ Max Angle Air Grinder
$306.00Features 0.88 HP air motor delivers 12,000 rpm for impressiveperformance and greater material removal. Internal governor maximizes speed under load, thusincreasing your productivity. Enhanced grip design and light-weight constructionincreases operator comfort for extended usage. Built-in lubricating wick optimizes the life of theangle gear set by improving lubrication to the pinion andbevel gear set. 9.6? Long,…
-
IR INGERSOLL RAND IR328B 8″ Air Geared Orbital Sander
$151.00Features The smooth strength and power of this air geared orbitalsander lets you remove heavy material and body filler onlarge, flat surfaces leaving a clean, swirl-free finish. Dual action pad motion (5/32″ orbit) A long-life, vibration free performance Balanced ball bearing construction Free speed: 825 RPM, ?8″ pad
-
IR INGERSOLL RAND IR324-1 Pin Stripe Removing Tool with Pad
$93.00Features Operates at an optimal speed (3700 rpm) to remove decals,pinstripes,and other adhesives with damaging paint? higher speed toolswilldamage the paint and/or work surface. Only 1.8 lbs, making the tool easy to use regardless oforientation tool needs to be held to get the job done. Speed 3700 rpm,pad size 4″
-
IR INGERSOLL RAND IR324 Pin Stripe Removing Tool with 12 Pads
$141.00Features Operates at an optimal speed (3700 rpm) to remove decals,pinstripes,and other adhesives with damagage? higher speed toolswilldamage the paint and/or work surface. Only 1.8 lbs, making the tool easy to use regardlessof orientation tool needs to be held to get the job done. Speed 3700 rpm,pad size 4″
-
IR INGERSOLL RAND IR315 Air Twin Piston Straight Line Sander 2-3/4″ x 17-1/2″ Pad
$140.00Features The twin piston design keeps extra power in reserve toprevent stalling and tackle sanding jobs like smoothing downbody filler or shaping and leveling large flat surfaces.* 3,000 reciprocating strokes per minute.* Quick action paper clamps.* Smooth, reliable power.
-
IR INGERSOLL RAND IR3128XPA 3″ Mini Air Random Sander
$135.00Features 0.2 hp (0.15 Kw) motor, with 3″ (75mm) pad Lightweight, at only 1.1 pounds (0.5 kg) Rated Power hp (kW): 0.2 (0.15) Max Free Speed (rpm): 15,000 Pad Diameter or Size in. (mm): 3″ (75) Orbit Diameter in. (mm): 3/16″ (5) Weight lbs. (kg): 1.1 (0.5) Length in. (mm): 4.5″ (115)
-
IR INGERSOLL RAND IR311A Air Dual Action Quiet Sander 6″ Pad – DA Sander
$96.00Features A built-in silencer muffles noise as you work with thiseconomical dual action sander. It?s a quality sander usedfor feather edging, metal preparation and finish work onbody filler. And its dual action pad motion producesswirl-free finishes.* Vibration-free.* Dependable performance.* Balanced ball bearing construction.* Adjustable built-in regulator for positive speed control.
-
DY DYNABRADE DY59040 6″Non-Vacuum Dynorbital-Spirit Random 2mm Orbital Sander
$205.00Features 6″ (152 mm) Dia. Non-Vacuum Dynorbital-Spirit RandomOrbital Sander.25 hp 12000 RPM 3/32″ (2 mm) Dia. Orbit Rear Exhaust Comfort Platform provides additional hand and wristsupport, further enhancing operator comfort. Also offersincreased protection against cold air exhaust. Throttle lever recesses into housing grip whendepressed, eliminating pressure-point on operator’s palm.Dynorbital-Spirit lever is made from composite material…
-
DY DYNABRADE DY59025 6″ Non-Vacuum Dynorbital-Spirit Random 5MM O
$205.00Features 6″ (152 mm) Dia. Non-Vacuum Dynorbital-Spirit RandomOrbital Sander.25 hp 12000 RPM 3/16″ (5 mm) Dia. Orbit Rear Exhaust Comfort Platform provides additional hand and wristsupport, further enhancing operator comfort. Also offersincreased protection against cold air exhaust. Throttle lever recesses into housing grip whendepressed, eliminating pressure-point on operator’s palm.Dynorbital-Spirit lever is made from composite material…
-
DY DYNABRADE DY59020 5″Non-Vacuum Dynorbital-Spirit Random 5mm Orbital Sander
$205.00Features 5″ (127 mm) Dia. Non-Vacuum Dynorbital-Spirit RandomOrbital Sander.25 hp 12000 RPM 3/16″ (5 mm) Dia. Orbit Rear ExhaustComfort Platform provides additional hand and wrist support,further enhancing operator comfort. Also offers increasedprotection against cold air exhaust. (NOTE: Comfort Platformis removable.) Order 59330 Comfort Platform (U.S. Patent No.D610,428) separately, to install on existing tools!Throttle lever recesses…
-
DY DYNABRADE DY59010 6″Non-Vacuum Dynorbital-Spirit Random 10mm Orbital Sander
$205.00Features 6″ (152 mm) Dia. Non-Vacuum Dynorbital-Spirit RandomOrbital Sander.25 hp 12000 RPM 3/8″ (10 mm) Dia. Orbit Rear Exhaust Comfort Platform provides additional hand and wristsupport, further enhancing operator comfort. Also offersincreased protection against cold air exhaust. (NOTE:Comfort Platform is removable.) Order 59330 Comfort Platform(U.S. Patent No. D610,428) separately, to install onexisting tools! Throttle lever…
-
DY DYNABRADE DYX62HS 6″ Dynorbital Extreme Random 2.5mm Orbital Sander
$236.00Features 6″ Dia. Non-Vacuum (152 mm) Dia. Non-Vacuum DynorbitalExtreme Random 2.5mm Orbital Sander0.3 hp 12000 RPM 3/32″ (2.5 mm) Dia. Orbit Rear ExhaustHook-Face w/Speed Regulator Added speed control to adjust the flow of air and RPM ofthe tool.. EXTREME POWER: New motor design has the highestpower-to-weight ratio in the industry, with 0.3 hp at 1.8lbs….
-
DY DYNABRADE DYX61HS 6″ Dynorbital Extreme Random 5mm Orbital Sander
$236.00Features 6″ Non-Vacuum (152mm) Dia. Non-Vacuum Dynorbital ExtremeRandom Orbital Sander0.3 hp 12000 RPM 3/16″ (5 mm) Dia. Orbit Rear ExhaustHook-Face w/Speed Regulator Added speed control to adjust the flow of air and RPM ofthe tool.. EXTREME POWER: New motor design has the highestpower-to-weight ratio in the industry, with 0.3 hp at 1.8lbs. Most consistent speed…
-
DY DYNABRADE DYNZ1K NitroZip Kit Surface and Decal Pinstrip Removal Tool
$396.00Features NitroZip Surface Conditioning/Decal Pinstrip RemovalTool.5 hp Right Angle 3500 RPM Rear Exhaust Using the Dynabrade Nitro Series NitroZip SurfacePreparation Tool equipped with a wire wheel allowstechnicians to remove rust and seam sealers in preparationfor repair or replacement of damaged vehicle components.When equipped with an eraser wheel the NitroZip removesadhesive-backed decals and lettering without damaging…
-
DY DYNABRADE DYNZ1 NitroZip Surface Decal Pinstrip Removal Tool
$353.00Features NitroZip Surface Conditioning/Decal Pinstrip RemovalTool.5 hp Right Angle 3500 RPM Rear Exhaust Using the Dynabrade Nitro Series NitroZip SurfacePreparation Tool equipped with a wire wheel allowstechnicians to remove rust and seam sealers in preparationfor repair or replacement of damaged vehicle components.When equipped with an eraser wheel the NitroZip removesadhesive-backed decals and lettering without damaging…
-
DY DYNABRADE DYEB3 3″ Extension Buffer/Polisher
$259.00Features 3″ Extension Buffer/Polisher 2700 RPM Right Angle3/8″-24 Spindle .5hp Compact, lightweight contemporary tool design Thermoplastic rubber tool grip reduces cold airtransmission and absorbs vibration Tool includes 50126 Hook-Face Backup Pad 3/8″-24 male spindle, rear exhaust Includes safety-lock lever; rotational rear exhaust todirect away from operator
-
CP CHICAGO PNUEMATIC CP7201P Mini Air Polisher Kit
$146.00Features Small Area Repair Tools (SMART) are designed to get the jobdone faster. 2500 RPM, 1/4″ HP air motor Adjustablespeed regulator to match speed to job Silenced exhaustdirects air away from work-piece 2 finger throttle andcomfortable rubber handle Comes with: 3″ backing pad,3-1/2″ wool polishing pad, two 3-1/2″ foam compounding pads,blow molded storage case
