Showing 81–100 of 185 results
-
$24.00
Features Removal of Plastic Push Pin Type Panel Fasteners withCenter Pins. Fits into recessed pin locations found on some vehicles. Also works on traditional clips. Integrated spring makestool easier to use. Built-in cutter allows technician to cut off fastenerhead. Also used to remove ATO, Micro, Mini Blade, Maxi and Paltype automotive fuses from panel.
-
$24.00
Features Removal of Plastic Push Pin Type Panel Fasteners withCenter Pins. Fits into recessed pin locations found on some vehicles. Also works on traditional clips. Integrated spring makestool easier to use. Built-in cutter allows technician to cut off fastenerhead. Also used to remove ATO, Micro, Mini Blade, Maxi and Paltype automotive fuses from panel.
-
$34.00
Features Spring Loaded Pliers Provides Extra Leverage to Remove DoorClips Without Damage. Ergonomic spring loaded handles are rotated 90? toprovide leverage needed to easily remove push in fasteners. Tapered forked end makes getting under the clips easierand helps prevent damage to the clips or door panel. Works on a wide range of push in clip…
-
$45.00
Features Disconnects quick connect push-in connectors found onheavy-duty truck air systems and more. Set comes with fivepopular sizes: 1/8″-5/32″, 1/4″, 3/8″, 1/2″ and 5/8″.Loosens bolts and clamps on tie rods for removal oradjustment. Each tool is double-ended to disconnect air lines evenin hard-to-reach areas. Angled end allows maximum leverage.Smaller end fits in tight spots.Loosens bolts…
-
-
$42.00
Features For 2005 and Later Ford F250 & F350.A heavy-duty puller for the large Pitman arms on Ford250 and 350 trucks. Jaws are forged and heat-treated forstrength. Position puller jaws under the Pitman arm, turncenter screw to remove.
-
$35.00
Features Designed to work on even the most stubborn Pitman armpulling jobs. Position puller jaws over Pitman arm and turncenter screw to free Pitman arm. Puller body is drop-forgedand heat-treated for strength.
-
$49.00
Features Six tools in one for exceptional versatility and value. Kitconsists of three forks and two handles; one for hammering,the other for use with an air hammer (.401″ shank). Allforks are threaded to interchange with either handle. Forksare heavy-duty forgings, handles are heat-treated alloysteel.
-
$109.00
Features Stepped Design on the Forks Keeps the Tool from BouncingBack when Separating Ball Joints, Steering Dampeners, TieRods, Pitman Arms and Other Applications. Includes five forks: 11/16″, 15/16″, 1-1/8″, 1-7/16″ and1-5/8″. Forks are threaded to interchange with either thehammering handle or the pneumatic driver. Heavy-duty, heat-treated forgings and the handles areheat-treated alloy steel. Fork steps…
-
$55.00
Features Step Design Helps Keep Tool from BouncingBack When Separating Ball Joints, SteeringDampeners, Tie Rods, Pitman Armsand Other Applications.Six tools in one. Three forks and two handles. Forks arethreaded to interchange with either handle. One handle forhammering; one for use with an air hammer (.401? shank).Forks are heavy-duty heat-treated, alloy steel forgings.Steps can be resharpened…
-
$119.00
Features The 20% Thicker Fork Design Provides Extra Lift WhenReplacing Worn Out Ball Joints, Pitman Arms, Pickup TrackBars and Other Includes five forks: 11/16″, 15/16″, 1-1/8″, 1-7/16″and 1-5/8″. Forks are threaded to interchange with eitherthe handle for hammering or the pneumatic driver (.401Shank) and a 6-1/4″ extension that works with either handleto provide extra reach.
-
$29.00
Features Easily Removes Trim Panel Fasteners. Specially designed double tapered tips slide under theclip and grip the side of the clip, helping prevent damage. Tips are angled 45? providing more leverage for easierclip removal, even in verytight spots. Dual durometer cushioned grips for comfort.
-
$29.00
Features Easily Removes Trim Panel Fasteners. Specially designed double tapered tips slide under theclip and grip the side of the clip, helping prevent damage. Tips are angled 45? providing more leverage for easierclip removal, even in verytight spots. Dual durometer cushioned grips for comfort.
-
$46.00
Features 7 Piece Low Profile, 6 Point Wrench with Offset 3/8″Square Drive for Clearance in Hard-to-Reach Spaces. Use on oil and fuel filter canisters when replacing theelement. Size is laser marked on each wrench with ablow-molded case for storage. 40610 – 24mm for Cadillac and some BMW 40620 – 25mm for Fleetguard Filter on Motorhomes,…
-
$10.00
Features Two Sizes, 3/8″ and 1/2″ are Designed toDisconnect Transmission Cooler Lines.Use 3/8″ size for 2003 and later Ford V8 Explorer, 2004 andlater Ford F150 and Cadillac CS. Use 1/2″ size for FordSuperDuty Trucks, F250, F350 and F450. Tip is specially steppedto fit connector. Simply push the line toward the connector,then engage tool and pull…
-
$53.00
Features Contains 8 Popular Disconnect Tools for A/C& Fuel Lines.A complete set of disconnect tools that can be stored ina handy blow-molded case. All disconnect tools are alsoavailable individually.
-
$8.00
Features For Popular Fuel Lines and A/C Connections.Three piece set includes 3/8″ and 5/16″ disconnects for fuellines, 5/8″ for fuel lines and air conditioningconnections. Setcomes on a bead chain.
-
$140.00
Features A Set of the Most Popular Disconnect Tools in One HandyMolded Case. Includes fuel line quick connect and spring lockcouplings, air conditioning line couplings, and transmissionoil cooler connectors.
-
$13.00
Features Used to release Transmission Oil Cooler (TOC) lines on Fordand Cadillac vehicles. Stepped design is built to work onthese special lines. Two sizes, 3/8″ and 1/2″, in onescissor. Similar in function to our 39960 plastic molded butmade from metal and in a scissor design. Use on Ford and Cadillac vehicles.
-
$27.00
Features Removes and installs axle nuts on 4WD axle hubs. Durable,impact-grade heat-treated alloy steel. Extra deep to fitover various axle lengths. Works where standard socketswon’t. Use with 1/2″ drive.Applications: 2008-2010 Toyota Land Cruiser 2008-2010 Toyota Sequoia 2007-2010 Toyota Tundra 2008 Lexus LX 570