Showing 81–100 of 126 results
-
$143.00
Features 12 Piece Set with Improved Socket Design to Work onLonger Applications. The long socket slips over tie rod end and crowfootengages on socket for easy removal and installation of tierods with inaccessible wrench flats. Includes 12crowsfeet, sizes 1-3/16″, 1-1/4″, 1-3/8″, 1-1/2″, 1-5/16″,1-7/16″, 29mm, 32.5mm, 33.6mm, 38.4mm, 40mm and 42mm, to fitmany cars, trucks and…
-
$81.00
Features Includes an Additional 1 1/2? Crows Foot forChevrolet Colorado and GMC Canyon.Works on tie rods with inaccessible flats. Many inner tierodend sockets do not have a complex hex on the full length ofthe socket. The rounded socket ends prevent access to thewrench flats. This tool utilizes six crows feet to engagethewrench flats. Long socket…
-
$137.00
Features Quickly and Easily Removes Sealed U-Joint Caps withoutDamage to Driveshafts, Yokes or Bearing Caps. Work on Class 7 and 8 trucks with 1.5″ to 2.2″ bearingcaps. Heat-treated threads and casting for durability.
-
$42.00
Features For 2005 and Later Ford F250 & F350.A heavy-duty puller for the large Pitman arms on Ford250 and 350 trucks. Jaws are forged and heat-treated forstrength. Position puller jaws under the Pitman arm, turncenter screw to remove.
-
$35.00
Features Designed to work on even the most stubborn Pitman armpulling jobs. Position puller jaws over Pitman arm and turncenter screw to free Pitman arm. Puller body is drop-forgedand heat-treated for strength.
-
$49.00
Features Six tools in one for exceptional versatility and value. Kitconsists of three forks and two handles; one for hammering,the other for use with an air hammer (.401″ shank). Allforks are threaded to interchange with either handle. Forksare heavy-duty forgings, handles are heat-treated alloysteel.
-
$109.00
Features Stepped Design on the Forks Keeps the Tool from BouncingBack when Separating Ball Joints, Steering Dampeners, TieRods, Pitman Arms and Other Applications. Includes five forks: 11/16″, 15/16″, 1-1/8″, 1-7/16″ and1-5/8″. Forks are threaded to interchange with either thehammering handle or the pneumatic driver. Heavy-duty, heat-treated forgings and the handles areheat-treated alloy steel. Fork steps…
-
$55.00
Features Step Design Helps Keep Tool from BouncingBack When Separating Ball Joints, SteeringDampeners, Tie Rods, Pitman Armsand Other Applications.Six tools in one. Three forks and two handles. Forks arethreaded to interchange with either handle. One handle forhammering; one for use with an air hammer (.401? shank).Forks are heavy-duty heat-treated, alloy steel forgings.Steps can be resharpened…
-
$119.00
Features The 20% Thicker Fork Design Provides Extra Lift WhenReplacing Worn Out Ball Joints, Pitman Arms, Pickup TrackBars and Other Includes five forks: 11/16″, 15/16″, 1-1/8″, 1-7/16″and 1-5/8″. Forks are threaded to interchange with eitherthe handle for hammering or the pneumatic driver (.401Shank) and a 6-1/4″ extension that works with either handleto provide extra reach.
-
$42.00
Features DodgeSeparates the Frozen Hub Assembly from theSteering Knuckle on Dodge Vehicles.Tool drives against loosened retaining bolts to separateassembly. Prevents damage to the knuckle and completehub assembly. Tool drives on the bolt flange, so the headof the retaining bolt is not destroyed. Kit contains 39300forolder, smaller applications and 39250 for 2003 and newer4-wheel drive 3/4…
-
$35.00
Features For all ear-type clamps including GM FWD outboard CVjoints. Designed for use with a torque wrench, as requiredfor stainless steel bands.
-
$49.00
Features Includes a 7″ Driver for Applications with LimitedAccess. Pneumatic bushing driver set removes and installstruck and trailer 1-3/8″ anchor pin bushings and stuckanchor pins. Double sided cone snaps onto driver to driveout and install bushings. Use flanged end to install andtapered end toremove. Also removes truck leaf spring bushings.
-
$27.00
Features Quickly Removes the U-Joint Cap fromthe Drive Shaft on Most Rear Wheel DriveVehicles.Use the driver with an air hammer to remove u-joint caps upto 1-5/16″ diameter. Prevents damage to drive shaft and axleshaft ears, when presses or chisels are used. On somevehiclesthe u-joint is retained with plastic from the factory. Theplastic must be removed…
-
$22.00
Features Stepped design helps keep tool from bouncing back. The 18530is used to replace worn out ball joints and to remove CVdrive shafts on FWD vehicles. The tine opening is 15/16″.These heavy-duty tools are drop forged and heat-treated forlong use. Steps can be sharpened if needed.
-
$22.00
Features Stepped design helps keep tool from bouncing back. 18520 isused to replace worn out tie rods and to separate shockabsorber links. The tine opening is 11/16″. These heavy-dutytools are drop forged and heat-treated for long use. Stepscan be sharpened if needed.
-
$208.00
Features The pipe stretcher kit is a convenient, inexpensivealternative to hydraulic pipe expanders. Comes in a moldedstorage case. Stretches Pipe up to 4-1/4″ IncludingStainless Steel. Use with an impact wrench to quickly stretch pipes.Collet sets expand pipes from 1-5/8″ to 4-1/4″. The tool can be used on the vehicle.
-
$84.00
Features Makes it Easier to Insert Wheel Bearing Race and SealsWithout Damage to Race and Axle Housing.This master set includes nine drivers to fit most commonwheel bearings. Turn discs over to drive seals. Inconvenient clam shell for storage.
-
$113.00
Features Contains 11 Drivers to FitAutomobiles and Trucks up to 1 Ton.This set also includes 2 handles, one for hammering and apneumatic handle for use with an air hammer. Use the tapereddriver side for bearing races; reverse to the flat side forseals.To add the pneumatic handle to your current set order a12820pneumatic driver.
-
$151.00
Features This versatile set allows for easy removal of the mostpopular types of Pitman arms, tie rods, and ball joints 2289 Pitman Arm Puller 22 x 140mm 3533 Tie Rod Puller 3916 Universal Ball Joint Separator 3917 Tie Rod End Puller and Pitman Arm Puller 3918 Universal Tie Rod End Remover
-
$27.00
Features KD CV Joint Boot Tightening WrenchSecurely fasten Band-it style free end clamps, roll band andclips or Band-it Jr. style pre-formed CV Boot Clamps. Thetool is used by turning the winding mandrel with a 1/2″socket or wrench. The mandrel tightens the clamp, holding itin place until the ears of the clamp are folded down.