Showing 21–40 of 229 results
-
$108.00
Features This kit is used with ball joint service kit No. 7249 toremove and install upper and lower ball joints on1967-current 1/2- and 3/4-ton 4WD vehicles having the Dana44front axle (found on Ford, GM, Dodge, IHC and Jeepvehicles).
-
$119.00
Features This heavy-duty slide hammer puller gets tough with thosereally stuck parts. Heat treated, 24″ long, and a 5/8″-18 threaded end to adapt to any ofOTC’s pulling attachments. Ten-pound hammer
-
$460.00
Features Everything you need to begin direct injector cleaning anddecarbonizing. Includes OTC7448A Fuel Injection Cleaner Canister whichprovides you with a heavy duty stainless steel container foryears of service Manual showing all the information you need to work onvirtually all vehicles manufactured between 1997 – 2013 inthe US Includes a spring lock coupling adapter, several quickconnect…
-
$85.00
Features Works on FWD and RWD import and domestic vehicles. Up to 5 tons of force can be applied.
-
$88.00
Features This puller enables you to remove the front spindle onlight-duty 4WD trucks. It?s designed for full-size Ford, GM,International, and Jeep pickups with Dana front axles. Alsoworks on Ford Ranger and Bronco II.5/8″ fine thread makes it ideal for use with our No. 1155slide hammer.Fits spindle thread sizes 2″-16, 1-5/8″-16 and 38 mm-1.5.
-
$118.00
Features Replaces existing products with multiple adapters. Itsunique cam design covers sizes from 33 to 41 mm hex, 2flats, round or any style rack ends. Since the wrench fitsall the way to the inner side of the tie rod link it makesit easy for the technician to unscrew the tie rod link forreplacement.
-
$221.00
Features Easily removes stubborn heavy-duty U-joints on Dana andRockwell? driveshaft assemblies.
-
$90.00
Features Need to manually rotate an engine? This tool makes thejob easy. Just insert the tool into the flywheel housinguntil it engages the ring gear, then attach a 1/2″ squaredrive ratchet or breaker bar and turn. The toolsload-bearing collar provides friction-free operation whilerotating the tool in the housing. Works on Cummins B and Cseries diesel…
-
$64.00
Features 2 tool set Cast metal design Removes belts without damaging Installs and removes stretch fit belts Includes an install tool along with a removal tool Designed to be used for installing and removing stretch fit belts
-
$102.00
Features Adjustable with special replaceable forged jaws. Two clamp bolts lock jaws on Pitman arm. Can perform other pulling jobs. Services cars and light trucks to 3/4-ton.
-
$112.00
Features This puller is designed for the toughest Pitman armjobs. They?re adjustable and have rugged forged jaws shapedto fit the job. Two clamp bolts lock the jaws on the Pitmanarm, ensuring a solid grip. Includes an adapter for addedversatility. Both pullers cover a variety of pulling jobs.For medium- and heavy-duty trucks. Max jaw spread: 2-1/4″.
-
$115.00
Features These devices quickly and easily compress most sizes ofMacPherson strut springs. Setup is fast and simple.Compression is achieved by alternating from one assembly toanother. Each device has a heat-treated alloy thrust screw(5/8″?11 x 12″) with forged hooks.
-
$64.00
Features For use with 1985-newer Ford F-series 3/4 and 1 tontruck with Dana 80 Rear axle
-
$101.00
Features Allows for engine oil pressure to be measured.Installs inplace of oil filter providing ports to attach oil pressuretester.Dual port for bottom or side testerconnection.Installs with 11/16? (17mm) hex drive socket. Fits GM 4.8L, 5.3L, 5.7L, 6.0L engines,1996-Present.Similar to J-42907
-
$123.00
Features Removes and installs the axle hub bearing retaining nut. Fits GM 11 1/2″ rear axle found on 2011 and newertrucks. 9 pin socket, 1/2″ drive. Similar to CH-50636.
-
$64.00
Features Removes front hubs without damaging the wheel bearing. Itsuniversal design fits most FWD cars. The spare locknut letsyou use it with a standard slide hammer puller for rear axleflanges.
-
$181.00
Features Removes and installs camshaft and crankshaft seals on carsand truck/van/suv’s without damage.Includes a puller coupled with specialized puller legs thathook the seal for quick and easy removal.The interchangeable seal install adapters are designed foruse with the cam or crank bolt. Kit services seal sizes of21.5mm to 64mm. Same as PBT Tools 70960
-
$330.00
Features Designed for installing wheel bearing cups oftractor/trailer wheels from 11000 to 50000 lb. capacity. AAdjust and lock the jaws to the cup I.D., slip on thenew cup, put it all in place, then hit the handle with ahammer.Adjusts from 3 5/8″ to 6 1/2″ dia. bearing cup O.D.
-
$55.00
Features Applications: 1985 1/2-1995 Ford F-series H.D. 3/4 and 1 ton Dana 50IFS or Dana 60 front axle 1985-1995 Ford F-series 1/2 ton truck and full size Broncowith Dana 28 front axle
-
$55.00
Features Applications: 1993-newer Ford Ranger, Bronco II and Explorer withmanual hubs 1995-newer Ford F-series 1/2 ton trucks and full-sizeBronco with manual hubs 1959-1985 Ford F-series 1/2 and 3/4 ton truck and fullsize Bronco 1960-1990 GM 1/2 ton trucks and full size Blazer/Jimmy 1969-1972 International 1/2 ton trucks 1969-1989 Dodge 1/2 ton trucks with manual hubs