View cart “CP CHICAGO PNUEMATIC CP7120 Chisel & Needle Scaler” has been added to your cart.
Showing 381–400 of 433 results
-
$144.00
Features Removes particulates and moisture Compact design, large capacity 5 micron particle filter Mounting bracket Regulator and gauge included on Model # HAR-680 Air Inlet: 1/2 NPT (female) Air Outlet HAF-580: 3/8 NPT (female) Air Outlet HAR-680: 1/4 NPSM (male) Air Capacity: 80 CFM filter 50 CFM regulator Max. Pressure: 150 PSI. Max. Temp.: 150?…
-
$52.00
Features Fits any professional spray gun Lightweight design is comfortable for use by right – orleft – handed painters Provides finer air control at the gun, enhancing colormatching capability Swivel top allows for easy and fast installation Max. Inlet Pressure: 160, Max. Reg. Pressure PSI: 0-160(Gauge Range). Max. Operating Temp 180F Air Inlet: ?? NPS…
-
$1,084.00
Features The CamAir? DAD-PRO? Desiccant Air Drying System providesworry free air filtration for top-quality paint jobs. Airenters the 2-stage filtration package where it is purged ofwater, oil and oil aerosols. Once cleaned, the air entersthe desiccant tank to further remove any remaining watervapor. First stage filter removes oil, water and dirt down to 5microns Second…
-
$327.00
Features ?Tornado? action separator ring removes water byswirling incoming air ?Flex drain? allows fast removal of water collected inthe bowl Quick release bowl guard and spin-off filter elementprovides quick, one-minute filter changes Quick shut-off valve 100 CFM air line filter w/ 60 CFM regulator
-
$1,281.00
Features Eliminates costly redo’s due to moisture and dirt in the airline – three stage drying and filtering system First stage centrifugal filter removes oil, water, anddirt down to 5 microns Second stage coalescer filter removes oil aeresols anddirt particles down to .01 microns Third stage uses low-dusting desiccant to trap watervapor25 CFM capacity Maintenance…
-
$476.00
Features THE ONLY HIGH-TORQUE DRILL WITH LOW SPEED FOR ULTRA HIGHSTRENGH STEELS. The Applies the cutting pressurepneumatically. You do not have to push on the drill bit. Patented valved cylinder applies gentle pressure towardthe panel. “Smart” pressure valve helps preventbreakage of bits and applies correct consistent pressurefrom the first to the last spot weld, ensuring…
-
$125.00
Features Compact, low profile head for drilling in confinedareas Reverse valve for easy directional changes Teasing throttle for control from startup through rundown Ideal for screwdriving, drilling in hard to reach areas Rear exhaust directs air away from the work piece Free speed: 1800 rpm, average air consumption: 5.25 cfm Air inlet thread: 1/4″ NPTF,…
-
-
$687.00
Features Powerful – 2140 ft/lbs. Ergonomic handle, adjustable to 4different positions. Durable clutch-closed, reinforced rocking dog clutch. Regulator integrated Forward/Reverse with 3 positionpower setting in both directions. Versatile Socket Retainer friction ring combined withhole retainer.
-
$401.00
Features 1200 Ft. Lbs. of Maximum Torque – power to loosen thetoughest fastener Weighs 11.5 lbs. and easy to handle over long periodsof use. The Ergonomic handle exhaust keeps exhaust air away fromthe operator 3 position power regulator and directional control, with3 positions in forward and full power reverse
-
$239.00
Features Most powerful tool on the market in its class: 922 ft.lbs ?1250 Nm of maximum real torque in reverseOne handed forward/reverse Full power in reverse: 922 ft. lb – 1250 Nm maximum realtorque in reverse 3 positions in forward: Low – 180 ft-lbs. / 245 Nm -Medium – 480 ft-lbs. / 650 Nm –…
-
$206.00
Features Most powerful tool on the market in its class: 922 ft.lbs ?1250 Nm of maximum real torque in reverseOne handed forward/reverse Full power in reverse: 922 ft. lb – 1250 Nm maximum realtorque in reverse 3 positions in forward: Low – 180 ft-lbs. / 245 Nm -Medium – 480 ft-lbs. / 650 Nm –…
-
$185.00
Features ULTRA Lightweight: 2.2 lbs. / 1.0 Kg Easy operation: S2S 1 hand Forward ? Reverse operation Compact: 4.3 in. / 108 mm length Powerful : max. torque: 350 ft.lbs. with 3/8″ drive Durable: Jumbo hammer mechanism
-
$161.00
Features Small Area Repair Tools (SMART) are designed to get the jobdone faster. 2500 RPM, 1/4″ HP air motor Adjustablespeed regulator to match speed to job Silenced exhaustdirects air away from work-piece 2 finger throttle andcomfortable rubber handle Comes with: 3″ backing pad,3-1/2″ wool polishing pad, two 3-1/2″ foam compounding pads,blow molded storage case
-
$522.00
Features This is the most powerful CP Hammer for automotive,truck, or off-road equipment use. . .498 diameter chisel shank to handle larger chisels andtool torque. Positive action trigger for precise speed control. 1800 blows per minute.” Piston Stroke: 2 11/16″ Avg. AirConsumption: 3 CFM Air Inlet NPTF in.: Min. Hose Size: 3/8″Sound DBA Pressure: 95…
-
$186.00
Features This is a dependable tool for all your surface preparationneeds, it can easily convert from a needle scaler to achisel scaler. Features, durability, flexibility, and power to clean.Speed: 4,600 blows per minute for highly efficient workAdjustability: Sleeve adjusts for needle protrusion intune with application needsWear resistant Needles: 19 needles made of 1/8″ highwear resistant…
-
$124.00
Features Powerful, yet economical for fast cutting action Vibration isolation system for smoother operation andgreater comfort Unique cushioned exhaust deflector on barrel for comfortand control Touch trigger for precision start ups and total control Ideal for exhaust system work, bolt cutting, bushingdriving, shearing and front end work Shank in 0.401 Bore in ?” Stroke in…
-
$19.00
Features Already on your hose and ready to use Easy push button trigger Works with tool connected or disconnected Max working pressure: 120 psi 1/4″ Automotive with 1/4″ female NPT Attractive retail packaging Patent pending
-
$19.00
Features Already on your hose and ready to use Easy push button trigger Works with tool connected or disconnected Max working pressure: 120 psi 1/4″ Industrial with 1/4″ female NPT Attractive retail packaging Patent pending
-
$19.00
Features Already on your hose and ready to use Easy push button trigger Works with tool connected or disconnected Max working pressure: 120 psi 1/4″ ARO with 1/4″ female NPT Attractive retail packaging Patent pending