View cart “KD GEARWRENCH KD84962 14MM 3/4″ Drive Hex Impact Bit Socket” has been added to your cart.
View cart “TA TOOL AID TA23970 In-Line Spark Checker Kit for Recessed Plugs” has been added to your cart.
Showing 121–140 of 975 results
-
$161.00
Features Gives fast, accurate power steering analysis. Test for defects in power steering pumps, gears andlines. Large heavy duty gage reads from 0-2,000 PSI and 0-140BAR. reads from 0-2,000 PSI and 0-140 BAR. Use to rule out power steering problems before expensivesuspension or steering linkage problem is attacked. Includes 13 adapters. Supplied with instructions in…
-
$122.00
Features Adapters cover most Vehicles.Includes 2 gauges, 6′ of hose and 10 assorted fittings. 0-600 PSI, 0-4000 kPa and 0-40 BAR.Gage is equipped with hang-up hook.
-
$115.00
Features Complete kit for testing compression of gasoline engines ondomestic and foreign cars and trucks, also on motorcycles,snowmobiles and lawn mowers. Flex hose eliminates need toremove auxiliary equipment such as power brakes andsteering, air conditioning and manifold. Screw-in adaptersguarantee accuracy over push-in type testers. This comescomplete with repair kit that includes: “O” rings, valvecores and…
-
$37.00
Features Dual threaded male end provides two adapters in one forcompression at the spark plug ports on Ford Triton engines. Provided with a long reach flexible hose to accessrecesses and around obstructions. Screws onto the 14mm-1.25 male thread at the end of thehose adapter for Cat. Nos. 34000 and 34300. Also works on Nissan
-
$69.00
Features Adapters fit 14 & 18mm plugs.Gage range 0-300 psi & 0-21 bar.
-
$34.00
Features 13″ Hose for Tool Aid fuel injection kits. Used on Ford.
-
$45.00
Features Adapter for all Domestic, Asian and European vehiclesequippedwith a standard Schrader test port. 21/2? diameter gage with dual scale and hang-up hook.Measures100 PSI and 7 BAR. Complete instructions.
-
$62.00
Features Fast and easy to use. Threads into the Oxygen Sensor Port. Kit includes 12MM and 18MM adapters to fit most domesticand imported vehicles. Gage measures 2-1/2″ diameter andhas dual scale: 15 PSI and 1.00KgCm2. Hose is 41″ long – No need to tap into exhaust systemthen reseal holes afterwards. Complete withinstructions.
-
$26.00
Features A must for testing newer vehicles with recessed sparkplugs Troubleshoots virtually all domestic and import cars,SUV’s & trucks Provides information not available with OBD II codereading devices Shows a duplicate view of the ignition spark
-
$10.00
Features Visually check condition of each cylinder
-
$10.00
Features Use to clamp fuel injection, brake, vacuum and coolingsystems hoses. Includes one each small, medium and large Hose ClampPliers in high visibility yellow Smooth, rounded jaws prevent hose damage. Lightweight and non-metallic Locks in closed position. Fast and east to use.
-
$26.00
Features Use to clamp fuel injection, brake, vacuum and coolingsystems hoses. Includes one each small, medium and large Hose ClampPliers in high visibility yellow Smooth, rounded jaws prevent hose damage. Lightweight and non-metallic Locks in closed position. Fast and east to use.
-
$35.00
Features Hose Clamp Pliers Set at any angle and to provide betterOne cross slotted jaw pliers and one wide flat band hoseclamp pliers for most ring type and flat band type hoseclamps.Jaws rotate to access hose clamps from any angle and toprovide better gripping action.Ratcheting locking mechanism holds clamps in open positionfor easy removal and…
-
$62.00
Features Use to seal metal lines once disconnected Prevents fluid leaks and contamination during service For use on fuel, brake, A/C, banjo, power steering andtransmission lines Use with all automotive fluids Supplied with two each of four Stoppers: Banjo Bolt,5/16″, 3/8″ & 1/2″ Adjusts and locks to 3 positions Installs in seconds
-
-
$125.00
Features Fits 15, 30 & 55 gallon drums with 2″ bung opening Dispenses approx. 8 gallons per 100 revolutions Curved discharge spout Handle swivels for easy cranking Made from polyphenylene sulfide (PPS) with fluorinerubber and Teflon(R) seals for use with: thinners, acetone,DEF (Urea), gasoline, water, weak acids, windshield washerfluid, anti-freeze, diesel, alkalines and petroleum
-
$353.00
Features 3/4″ drive Truck Pinion Locknut Impact Socket Set 7 extra thin wall deep impact sockets for removing orinstalling transmission and differential end yoke lock nutson most trucks Includes: 2″, 2-1/8″, 2-1/4″, 2-3/8″, 2-1/2″, 2-5/8″ and2-3/4″
-
$56.00
Features 24″ flexible neck cable for hard to reach areas Clamps lock in open position Removes plastic and metal self-tightening (11/16″ -2-1/2″ diameter) hose clamps Extended clamp on allows for added extension Lifetime warranty (does not include cable andspring)
-
$112.00
Features Forged from CR-V alloy steel for maximum strength Heavy duty blow mold case For installation and removal of locknuts For use with 1/2″ ratchet or breaker bar Includes: 6PT 2-3/8″, 8PT: 2-3/8″, 6PT 2-1/2″, 8PT:2-1/2″, 6PT 2-9/16″, 8PT: 55mm, 6PT 2-3/4″
-
$80.00
Features 17mm, 19mm, 21mm – 1/2″ Drive Extra Thin Wall 150mm (5.9″) length of these extra long thin wallsockets enable usage of a standard impact wrench, ratherthan one with a 2″ anvil?Durable outer sleeve and insert protects wheels and lugnuts from damage during the installation and removal oflugnuts during tire service.