Showing 21–40 of 86 results
-
$113.00
Features Designed for removing the harmonic balancer in tightengine compartments without removing the radiator. This kit includes an extra set of jaws to cover moreapplications and vehicles. Kit also contains the 3-jaw puller, four lengths offorcing rods, and a forcing screw with a 3/8″ internalsquare drive for ratchet use, and a 3/4″ external hex forwrench…
-
$109.00
Features Designed for removing damper pulleys in tight enginecompartments,without removing the radiator. Use on the following: GM 2000 Generation III 4.8L, 5.3L, 5.7L 6.0L, and 8.1LV8s.Also works on Cadillac 4.5, 4.6, and 4.9L V8s beginning in1988. Chevrolet trucks 2003-later 4.2L I6, 2004-current 3.5LI5and 2005-current 2.8L I4. Chrysler engines from 1990-later, including 2.0L,2.4L-4s; plus 2.5L, 2.7L,…
-
$71.00
Features Ideal for servicing hubs on today’s popularfront-wheel-drive small cars. The cone holds the jaws inplace during pulling. Perfect for pulling internal bearingcups, seals, bushings, etc. Jaw spread: 15/16″ to 3-1/4″ Reach: 3-1/2″ Use with any slide hammer having a 5/8″ – 18 thread (OTCNo. 1155 or No. 1156 or No. 927 Push-Puller).
-
$191.00
Features Designed for use on power steering pump pulley toprevent damage during pump and pulley removal. Also used toremove alternator pulley on Chrysler vehicles. Applications include: Chrysler 2006 – 2008 Pacifica, Sebring, Town & CountryDodge 2006 – 2008 Stratus, Caravan, Grand Caravan, PTCruiser Jeep 2006 – 2008 Liberty, Wrangler Plymouth 2006 – 2008 Grand Voyager,…
-
$109.00
Features This tool holds the alternator shaft in place so thedecoupler pulley can be removed and installed. Male andfemale ends are 10mm. Applications include 2004-Later Chrysler/Dodge/Jeepvehicles. Similar to OE part number MLR-8433A.
-
$94.00
Features Puller will spread from 2″ to 7-3/4″ Cross Block is 8-1/4″ wide Forcing screw is 3/4″-16 x 11-5/8″ long Accommodates any cap screw up to 1/2″ diameter
-
$327.00
Features Larger diameter threaded shaft can handle U-joints thatare severly seized and require higher force to pull andinstall. Major tool components are heat treated for improvedstrength and durability. Smoother thread allows for a lower, more consistenteffort to rotate shaft. Designed to fit all Class 7 and 8 trucks, including awide variety of drivelines from Spicer…
-
$152.00
Features Will yank even the most corroded slack adjuster off theS-cam and do so in just a fraction of the time needed withheat and beat methods. Rugged forcing screw and caststeel body. Also a pitman arm pulleron 2500/3500 Silverado, Sierra and RAM Trucks 2011 ? Current Chevrolet Silverado, GMC Sierra 2500 AND3500 trucks 2009, 2013…
-
-
$70.00
Features # Reversible 2-in-1 tool removes and installs press-fitalternator and power steering pump pulleys./8″.# Also removes and installs other press-fit pulleys with ahub diameter of 1-1/8″ (28mm),1-1/4″ (32mm), 1-5/16″ (34mm), or 1-3/8″ (35mm).
-
$102.00
Features The 4680 Wiper Puller from OTC has a unique design wherejaws are forged with radius to hug the center screw forminimal spread, and for accessing recessed components. Theradius also ensures optimal contact with object beingpulled. It comes with 2 pair of legs – 9/16″ width and 1″width – for many types of small component…
-
$24.00
Features Removes wiper arms on many foreign and domestic cars andlight trucks. Will not damage wiper arm or hood cowling during removal Simply place puller feet under wiper arm and tightenforcing screw against wiper shaft.
-
$232.00
Features For jobs requiring an inter pull.Four collect sizes: 3/8″ to 1/2″, 9/16″ to 11/16″, 5/8″ to1″ to 1-1/4″, and a 2-1/2″ pound slide hammer.
-
$145.00
Features Pulls flange-type rear axles and most front-wheel drivehubs. Internal and external jaws provide a variety ofcombinations to pull bearings, gears and seals. Two- and three-way cross blocks and cone provide theperfect jaw configuration for most jobs. Set also includes a grip wrench adapter and a dentpuller attachment for sheet metal or other unique pullingrequirements….
-
$184.00
Features Use For a wide range of pulling jobs, including: bearings,alternators, generators, power steering and crankshaftpulleys, timing gears, and harmonic balancers.Set includes drop-forged components, which can be usedin a variety of combinations.Contents of Set:2 ? Forcing Screws (Live Center): 3/4″-16 x 6-11/16″ and3/4″-16 x 5″2 ? Cross-bar Yokes: 3 pin-hole @ 3-1/4″ to 5-1/2″, 2pin-hole…
-
$217.00
Features Wide Spread Crossbar with 3 pin-hole; 7-1/4? to 9? 2 pair of long reach jaws gives user reach options of5-1/2? and 9-1/2? 2 long reach forcing screws (live center) for pushes of4-1/2? to 10-1/2? Accepts shorter jaws from 4534 kit 7 Ton version of our Multipurpose Bearing and PulleyPuller Set
-
$155.00
Features For easy removal of most harmonic balancers and drivepulleys which are press-fitted onto the crank-shaft. Abearing-centered circular 2/3-way and an assortment ofmetric and fractional bolts and adapters provide widecoverage.A heavy-duty, 3/4″ dia. forcing screw is internallythreaded to fit the eight adapters to install harmonicbalancers. Adapter sizes included: M16 x 2.0, M14 x 1.5, M12x…
-
$60.00
Features # A complete set of tools required to remove and installpower steering pump pulleys of most domestic vehicles.# Fits pulley hubs with diameters of 1- 1/8″, 1-1/4″, 1-5/16″ and 1-3/8″.# Includes the necessary adapters for servicing: GM 3.1 L,3100, 3400, and 3800 V6 engines, GM 2.3L Quad 4four-cylinder engines and Ford 4.6L, 5.4L, and…
-
$59.00
Features Properly replaces pressed-on power steering andalternator pulleys on Ford, Chrysler, and late GM engines. Housed in a blow-molded plastic storage case.
-
$136.00
Features Use to remove differential side carrier bearing. Works on awide variety of cars and light-duty trucks. Includes four step plate adapters to fit carrierbearings. Reach: 1-5/8″. Spread: 2-5/8″ to 3-3/8″. Forcingscrew is 3/4″-16 mm x 6-11/16″ lg. Set includes: 4520-1Forcing Screw / Cross Block Assembly 4520-2 Puller Jaws /Pins (set of two ea.) 4520-3…