View cart “MI MILTON MIULR125012 1/2″ x 50′ ULR Hose with 1/2″ NPT” has been added to your cart.
Showing 141–160 of 197 results
-
$659.00
Features Remove, install, and transport truck brake drums withoutphysically having to lift them. Works on 15″ and 16-1/2″ drums found on most Class 7 and8 tractor and trailer brake systems. Heavy-gauge steel construction, ten-inch pneumatictires, and adjustable handle. Covered by OTC Lifetime Marathon Warranty?.
-
$1,659.00
Features Rugged, stable unit is ideal for handling heavytransmissions. Includes adapter plate for Eaton Fuller RoadRanger transmissions. Low profile design gets under thelowest clearance trucks, making it ideal for clutch repairwork. Pump handle rotates 360 degrees for operatorconvenience. Safety overload prevents use beyond its ratedcapacity. Height range 6-7/8 in. to 35-1/4 in.
-
$491.00
Features Includes: 1121 – Bearing splitter with 15/16″ max spread and 1/4″minimum spread; 1122 – Bearing splitter with 2″ maximum spread and 1/8″minimum spread; 1123 – Bearing splitter with 4-5/8″maximum spread and 1/2″ minimum spread; 1130 – Bearingsplitter with 9″ maximum spread and 1/2″ minimum spread; 679 – Pulley pulling attachment with a 5-7/8″ maximumspread…
-
$228.00
Features Features ‘knife-like” edges which are easily placed behindthe part to secure a gripping surface, even when clearancesare extremely limited. When used with an OTC Grip-O-Matic?puller, puller jaws grip attachment’s outer edge; when usedwith a Push-Puller, puller legs are threaded into theattachment’s two tapped holes. Max. Spread 9″ Min. Spread 1/2″ Thread of tapped holes…
-
$112.00
Features Heavy duty treated steel constructionKnife like edges which are easily placed behind thepart to secure a gripping surface even when clearences areextremely tight. Use with puller #’s 1035, 1036, 1037, 1038and 927.
-
$56.00
Features Features ‘knife-like” edges which are easily placedbehind the part to secure a gripping surface, even whenclearances are extremely limited. When used with an OTCGrip-O-Matic? puller, puller jaws grip attachment’s outeredge; when used with a Push-Puller, puller legs are threadedinto the attachment’s two tapped holes. Max. Spread 15/16″ Min. Spread 1/4″ Thread of tapped holes…
-
$161.00
Features 1500 Lb. Capacity Auxiliary Stand with a foot pedal – used under hoist to provide partial support for positioning of vehicle components during their installation and removal. An adjustable saddle sits atop a fixed column and base, providing high reach assistance to a technician removing or installing vehicle components like transmissions, radiators, driveshaft’s, exhaust…
-
$128.00
Features Are constructed of a formed and welded high-quality steel base for strength to provide years of safe vehicle holding. Self-locking ratchet handle cannot be released under load and feature a wide range of locking heights and adjusting positions to provide a universal stand for most vehicles. The form-fit saddle design and wide base ensures…
-
$155.00
Features Constructed of a formed and welded high-quality steel base for strength to provide years of safe vehicle holding. Self-locking ratchet handle cannot be released under load and feature a wide range of locking heights and adjusting positions to provide a universal stand for most vehicles. The form-fit saddle design and wide base ensures stability….
-
$81.00
Features These all-new 3-Ton Steel Jack Stands are constructed of a formed and welded high-quality steel base for strength to provide years of safe vehicle holding. Self-locking ratchet handle cannot be released under load and feature a wide range of locking heights and adjusting positions to provide a universal stand for most vehicles. The form-fit…
-
$263.00
Features S022 is a pair of 22 Ton capacity pin style stands. The fully steel construction consists of a large, 11? flat square base welded to a square tube and steel support column. Rated to safely hold 44,000 lbs., the flat base resists sinking into concrete, asphalt and other soft surfaces. A single pin-style adjustment…
-
$118.00
Features Made out of strong rubber, this heavy-duty hoseconnector is built to withstand extreme environments,resisting abrasions and kinks. Built-in ozone resistanceprotects the air compressor hose from extreme weather. Up to 40% lighter than traditional rubber hoses, thissuper lightweight hose mimics the ease and weight of ahybrid hose while maintaining the durability and flexibilityof rubber hoses….
-
$69.00
Features Made out of strong rubber, this heavy-duty hoseconnector is built to withstand extreme environments,resisting abrasions and kinks. Built-in ozone resistanceprotects the air compressor hose from extreme weather. Up to 40% lighter than traditional rubber hoses, thissuper lightweight hose mimics the ease and weight of ahybrid hose while maintaining the durability and flexibilityof rubber hoses….
-
$24.00
Features Plug empty spark plug holes Prevents foreign debris from entering piston combustionchamber Prevents costly engine tear down Also use to plug AC and oil lines Includes 8 pieces
-
$19.00
Features RIGHT ANGLE combines both an extra ring of solvent jetsto keep the brush head clean and an ergonomic design toreduce strain. Designed for industrial parts washers with solventcirculating pumps. Strain-reducing ergonomic design. Bullet-shaped tip resists mushrooming. Extra ring of solvent jets to keep the brush head clean.Durable, injection-molded handle with ribbed design for firmgrip….
-
$24.00
Features Similar to our popular ORIFLO flow-thru parts washerbrush, but with a shutoff valve to control solvent flowthrough the bristle head. Designed for industrial parts washers with solventcirculating pumps. Bullet-shaped tip resists mushrooming. Shutoff valve to control solvent flow. Durable,injection molded handle with ribbed design for firm grip. Long-lasting, stiff Trialoy polyester filament can beused…
-
$18.00
Features A tough brush that will last and last with an ergonomicdesign to reduce strain.. Strain-reducing ergonomic design.Bullet-shaped tip resists mushrooming. Durable, injection-molded handle with ribbed design forfirm grip. Long-lasting, stiff Trialoy polyester filament can beused in either petroleum- or water-based cleaning solutions Specifications: Length: 11.75? (30 cm) Weight: 4.88 oz. (138 gm) Filament: Trialoy…
-
$26.00
Features MULTI FLO combines our best features – flow control,ergonomic design and bristle-washing jets into one brush. Designed for industrial parts washers with solventcirculating pumps. Strain-reducing ergonomic design. Shutoff valve to control solvent flow. Bullet-shaped tip resists mushrooming. Durable,injection-molded handle with ribbed design for firm grip. Long-lasting, stiff Trialoy polyester filament can beused in either…
-
$26.00
Features BREAK BEAUTY is the ultimate parts cleaning brush withergonomic design and solvent shutoff valve. Designed forindustrial parts washers with solvent circulating pumps.Strain-reducing ergonomic design. Solvent shutoff valve to control solvent flow. Bullet-shaped tip resists mushrooming. Durable, injection-molded handle with ribbed design forfirm grip. Long-lasting, stiff Trialoy polyester filamentcan be used in either petroleum- or…
-
$29.00
Features TIME SAVER (#2) has a flat head for cleaning largesurfaces and an ergonomic strain-reducing design. Flatbrush head for large surface cleaning. Strain-reducing ergonomic design. Durable, injectionmolded handle with ribbed design for firm grip. Long-lasting, stiff Trialoy polyester filament can beused in either petroleum- or water-based cleaning solutions. Specifications: Length: 11.75? (30 cm) Weight: 5.09…