Showing 41–60 of 95 results
-
$46.00
Features Brake Fluid Tester for DOT 4 Determines quality of brake fluid. Measures moisture form 0%-4%. LED lights to show moisture percentage. Automotically shuts off after 12 seconds. 1.5V AAA battery included.
-
$2,427.00
Features Replace rusted and frozen heavy-duty front suspensionbushings faster and easier. Patent-pending design is suspension-mounted, eliminatingthe need to hold the tool during operation. Cylinder Force Capability | 25 tons, Pump Pressure |10,000 psi, Pump Capacity (useable) | 98 cu. in. Patented Design allows tool to be mounted to suspensioninstead of needing to be held by…
-
$1,247.00
Features Master driver set for complete servicing Includes three handle sizes and 65 discs ranging from1/2 inch to 4-1/2 inch diameter Now you can have the proper-size driver for nearly anyautomotive seal bearing or bushing installation job 2 cases
-
$489.00
Features Now you can have the proper-size driver for nearly anyautomotive seal, bearing, or bushing installation job. Thesesets include discs and handles, spacers and drivers.Basic set includes a handle and discs (1/2″ to 3″diameter) specially selected to provide the driver sizesusually needed in automotive service. 41 Discs Total.
-
$105.00
Features Contains: 7/16 x 6″, 1/2 x 10″, 9/16 x 14″ & 5/8 x 20″Bearing Race PunchesOval tip designed specially for bearing raceapplication Bearing Race punches are used to remove bearing races inautomotive and industrial settings. Many sizes are availablefor differing bearing sizes. The steel for these punches isspecially heat treated to make the punches…
-
$112.00
Features Standard .401 turn type parker shank for air guns. Fully hardened and tempered shock resistant tool steel. Black oxide finish to prevent corrosion. Set includes the following: OD Pipe Cutter x 8-1/4″, Pipe Remover x 8-1/4″, 3/8″ Nut Splitter 3/4″ x 6″, Pipe Cutoff x 7-1/2″, ID Pipe Cutterx 8-1/4″ Made in the USA.
-
$62.00
Features The Master Line Stopper Set provides coverage for manyinternal and external lines found on vehicles. Fourdifferent size stoppers for automotive flare type steelbrake lines, power steering and transmission cooler lines. . Includes four stoppers to seal lines in automotiveflare type steel brake lines, power steering andtransmission cooler lines. Two line clamp pliers 6-1/4″ and…
-
$21.00
Features Set of Seven Disconnect Tools for Spring Lock Connectors onA/C and Fuel Lines Found on Many Chrysler and Ford Vehicles. The tools are color coded for sizing and spring loadedto remain on the A/C or fuel line.
-
$136.00
Features DRIVER SETSet Includes 8 Drivers for Driving Inner andOuter Pinion Bearing Races on 1/2 & 3/4 TonFord, Dodge and GM Pickups.Use the extended, two-piece handle for driving rear pinionbearing races. A pneumatic handle is also included for usewith an air hammer. 2-11/16, 2-27/32, 2-7/8, 3, 3-1/4, 3-1/2, 3-3/4, and4-1/2
-
$45.00
Features Disconnects quick connect push-in connectors found onheavy-duty truck air systems and more. Set comes with fivepopular sizes: 1/8″-5/32″, 1/4″, 3/8″, 1/2″ and 5/8″.Loosens bolts and clamps on tie rods for removal oradjustment. Each tool is double-ended to disconnect air lines evenin hard-to-reach areas. Angled end allows maximum leverage.Smaller end fits in tight spots.Loosens bolts…
-
-
$42.00
Features For 2005 and Later Ford F250 & F350.A heavy-duty puller for the large Pitman arms on Ford250 and 350 trucks. Jaws are forged and heat-treated forstrength. Position puller jaws under the Pitman arm, turncenter screw to remove.
-
$10.00
Features Two Sizes, 3/8″ and 1/2″ are Designed toDisconnect Transmission Cooler Lines.Use 3/8″ size for 2003 and later Ford V8 Explorer, 2004 andlater Ford F150 and Cadillac CS. Use 1/2″ size for FordSuperDuty Trucks, F250, F350 and F450. Tip is specially steppedto fit connector. Simply push the line toward the connector,then engage tool and pull…
-
$53.00
Features Contains 8 Popular Disconnect Tools for A/C& Fuel Lines.A complete set of disconnect tools that can be stored ina handy blow-molded case. All disconnect tools are alsoavailable individually.
-
$8.00
Features For Popular Fuel Lines and A/C Connections.Three piece set includes 3/8″ and 5/16″ disconnects for fuellines, 5/8″ for fuel lines and air conditioningconnections. Setcomes on a bead chain.
-
$13.00
Features Used to release Transmission Oil Cooler (TOC) lines on Fordand Cadillac vehicles. Stepped design is built to work onthese special lines. Two sizes, 3/8″ and 1/2″, in onescissor. Similar in function to our 39960 plastic molded butmade from metal and in a scissor design. Use on Ford and Cadillac vehicles.
-
$19.00
Features Disconnects spring lock couplings on Ford andChrysler AC lines. Works on fuel lines and other quickdisconnect couplingson domestic and import vehicles.The handles are angled to access tight spots. Made ofdurable plastic thatresists fuels and solvents. Sixsizes: 5/16″,3/8″, 1/2″, 5/8″, 3/4″ and 7/8″.All disconnects available individually skin-packed.
-
$8.00
Features Disconnects the Heater Hose Fittings on 2012- 2016 Ford Focus 2.0L and 2013-2016 Ford Escape 2.0L EcoBoost?. These type of fittings are close to the firewall behind the engine and are difficult to turn with very little to hang onto to rotate. They only get worse over time with each heat cycle and deposit…
-
$14.00
Designed to Separate Quick-Connect Fittings on 3/4″ Heater Lines on GM Vehicles. Hinged design allows the tool to slip over the heater hose, even in tight spaces. Slide the tool into the connector to release the line. Aluminum provides strength and durability.
-
$11.00
Features Set of six tools which disconnect the spring lockcouplings on Ford and Chrysler air conditioning line. Also works on fuel line quick connect couplings found onGM, Ford, and Chrysler . sconnect the spring lockcouplings on Ford and Chrysler air The 5/16″ size fits on push lock connectors found onFord radiators and transmission lines. ouplings…