Showing 841–860 of 861 results
-
-
-
CV CAL-VAN CV95500 Stud Extractor
$262.00Features Removes studs even if only a few threads are exposed. Easily installs new studs without damage to threads. For thread sizes: 1/4″x20, 1/4″x28, 5/16″x18, 5/16″x24,3/8″x16, 7/16″x14, 7/16″x20, 1/2″x13, 1/2″x20, 9/16″x12,9/16″x18, 5/8″x11 and 5/8″x18.
-
CV CAL-VAN CV767 Ratcheting Copper Tubing Hose and PVC Cutter
$26.00Features Cuts industrial air hose, multi purpose hose, heater andwasher vacuum hose, non metallic fuel line hose, PVC pipe,battery cables, copper tractor trailer cables and nonmetallic air brake hose up to 1 1/2″ diameter. Features a quick release mechanism to quickly and easilyopen pliers for use. Ratcheting action makes cutting easy. Also features a locking…
-
CV CAL-VAN CV49 Straight U-Joint Snap Ring Pliers
$26.00Features Strong enough to remove U-joint snap rings with theprecision for plastic clips on interior and body panels. Great for removing interior clips and body panelfasteners.
-
CV CAL-VAN CV29200 Spring Loaded Filter Removal Plier Set
$74.00Features Features 2 Professional Spring Loaded Filter Pliers Twist Pipes, Filters and other round objects with ease Size ranges 2 1/4″ to 5 3/4″ and 3 3/4″ to 7 1/2″
-
-
CM CTA MANUFACTURING CM8255 5 Pc NF – SAE Die Set
$34.00Features Type: NF (Fine) Size: 3/4″, 7/8″ – 14, 1″ – 14, 1-1/8″ – 12, 1-1/4″ – 12 5 Pc. NF-SAE Die Set Packed in Square Plastic Sliding Case MADE IN USA
-
CM CTA MANUFACTURING CM8250 5 Pc NC – USS Die Set
$34.00Features Type: NC (Coarse) Size: 3/4″, 7/8″ – 9, 1″ – 8, 1-1/8″ – 7, 1-1/4″ – 7 5 Pc. NC-USS Die Set Packed in Square Plastic Sliding Case MADE IN USA
-
CM CTA MANUFACTURING CM5401 Slide Hammer Threaded Adapter
$18.00Features Male to Female Threaded Adapter used with #5405, #5407 ᔡ to extract dipstick tube, using any standard thread(5/8″-18 TPI) slide hammer tool. Also use at the end of Push Puller legs or forcingscrews when pulling shafts, bearing caps, pinions, etc. Female End – 5/8″-18 TPI, Male End – 3/8″-16 TPI, Length- 2 1/4″.
-
CM CTA MANUFACTURING CM5170 7 Piece Plastic Pry Bar Set
$11.00Features For prying, scraping, fastener removal & more All 7? / 18cm long with hang hole Bright red color
-
CM CTA MANUFACTURING CM5160 15.75″ Trim Door and Pry Tool
$26.00Features For use on Instrument Panels, Door Thresholds, InteriorTrim, Trunk Panels, etc. Nylon plastic body will notmar or scratch surfaces. 400mm / 15-3/4? long for extra reach.
-
CM CTA MANUFACTURING CM1000 VibroShock Impact Tool Kit
$94.00Features Removes frozen or rusted screws, nuts, bolts or plugswithout damage. Great for Brakes, Exhaust, Glow Plugs, Clamp-onInjectors, Lug Nuts Set includes: Vibro-shaft with articulated wrench, 7Metric Impact Sockets – 8, 9, 10, 11, 12, 13, 14mm – all3/8″ square drive & all with “Internal Edge”
-
CL CHANNELLOCK CL968 7.5″ XLT Forged Wire Stripper
$49.00Features XLT: XTREME LEVERAGE TECHNOLOGY (XLT?) increasesperformance and reduces hand fatigue. FORGED high carbon steel for maximum strength anddurability is specially coated for ultimate rust prevention. REAMING HEAD for up to 1 inch conduit. SPRING-LOADED handle for easy one-handed operation. CURVED SHEAR is uniquely shaped to contain materialduring handling. LOCK for safe storage. STRIPS 10-20…
-
CL CHANNELLOCK CLTR-1 5 Piece Channelock Tool Roll Set
$119.00Features A USA Made Cutter & Plier Tool Set Plier jaws are heat treated and precision made of finepolished, high carbon steel. Includes the industry standard 6″ and 9.5″ tongue andgroove pliers, 8″ long nose plier, 7″ diagonal plier and8.5″ lineman pliers in a 5-pocket roll pouch.
-
KD GEARWRENCH KD89623 1/4″ Drive Torque Screwdriver 5-25 in/lbs
$161.00Features Designed for electrical service and assemblyapplications Torque accuracy of +/- 6% CW Locking adjustment collar allows for easy setting ofdesired torque setting Quick release 1/4″ bit holder Scale markings are highly visible and easy to read Solvent resistant co-molded handle for comfort anddurability Meets or exceeds ASME B107.300 and exceeds ANSIspecifications on load and…
-
Sale!
KD GEARWRENCH KD89620 20 Pc. 1/4″ Drive Torque Screwdriver Set 10-50 in/lbs
Original price was: $231.00.$183.12Current price is: $183.12.GEARWRENCH 20 Pc. 1/4″ Drive Torque Screwdriver Set 10-50 in/lbs. – 89620 Designed for electrical service and assembly applications Co-molded, comfort grip, high torque handle 19 special length screwdriver and nutdriver bits Locking adjustment collar allows for easy setting of desired torque setting Quick release 1/4″ bit holder GEARWRENCH Material Alloy Steel Item Weight…
-
AH ASSENMACHER AH202 5 Piece Stud Extractor Set 1/4 5/16 3/8 7/16 1/2″
$70.00Features Designed for R&R to reach studs in difficult work areas Roller bearings effectively put even pressure on thestud Sizes 1/4, 5/16, 3/8, 7/16, and 1/2″
-
AH ASSENMACHER AH201-7 5 Pc Metric Stud Remover/ Installer Set
$70.00Features Designed for R&R to reach studs in difficult work areas Roller bearings effectively put even pressure on thestud Sizes 6, 7, 8, 10, 12MM
-
AH ASSENMACHER AH201 4 Piece Stud Extractor Set 6 8 10 12MM
$55.00Features Designed for R&R to reach studs in difficult work areas Roller bearings effectively put even pressure on thestud Sizes 6, 8, 10, 12MM
