Showing 21–40 of 43 results
-
$460.00
Features This set allows for the removal and installation ofpress-fit ball joints on many GM and Ford light-duty trucks,vans and SUVs through 2003; Dodge light trucks through 1998;Dodge vans, Durango and Dakota through 2003; and HondaAccord, Civic, del Sol, and Prelude through 2001.# Combines the popular OTC 7249, 7918 and 7996 ball jointsets into one…
-
$108.00
Features Works on 2005 and newer Ford F-250 and F-350four-wheel-drive Super Duty trucks. Allows the Pitman arm to be removed from the steeringgear while the steering gear is still in the vehicle. Two clamp bolts lock the jaws on the Pitman arm,ensuring a solid grip. Maximum jaw spread is 3-1/4″. Fitment includes 2014 – Current…
-
$102.00
Features Features five popular “Pickle Forks” in a blow-moldedcase.Used to remove shock linkage, tie rods, and ball joints.Also for general service on many cars and light trucks. Includes:6531 – Size 11″ X 1-1/8″ Fork Spread6532 – Size 11-3/4″ X 1-5/8″ Fork Spread6533 – Size 11-5/8″ X 1-7/16″ Fork Spread6534 – Size 16″ X 11/16″ Fork…
-
$66.00
Features This tool is used to separate the ball joint from thespindle support arm. It works on many domestic and importfront wheel drive vehicles, and is adjustable up to 2″ fordifferent size ball joints.
-
-
$122.00
Features Quickly and easily installs bearing cups on boltretaineduniversal joints. Fits series 1610 to 1880and nearly all other heavy-duty truck and machinetype u-joints with bolt-retained bearing cups. Automatically aligns bearing cups duringinstallation. Eliminates the possibility of damage to theneedle bearing.
-
$125.00
Features Ball Joint Receiver Tube 2-7/8″ O.D x 2-5/8″ x2-7/8″2-7/8″ O.D x 2-5/8″ x 2-7/8″ Use with a C-Frame press for ball joint R&R
-
$575.00
Features A new solution, building on the legendary OTC 7249 C-frameball joint kit. This extra-large C-frame uses stainlesssteel ball bearings to securely hold cups and adapters,making it easier to setup your press to remove and installball joints, U-joints, wheel studs and more. The starter kitincludes 7 cups and adapters for more than 230 vehicleapplications, 38%…
-
$270.00
Features Extra-large C-frame uses stainless steel ball bearingsto securely hold available connected cups and adapters,making it easier to setup your press to remove and installball joints, U-joints, wheel studs and more. The connected adapter C-frame is also compatible withexisting OTC ball joint kits, including cups and adaptersfrom CA7149, CA6630, 7249, 6529, 6539, 6559 and more….
-
$137.00
Features Quickly and Easily Removes Sealed U-Joint Caps withoutDamage to Driveshafts, Yokes or Bearing Caps. Work on Class 7 and 8 trucks with 1.5″ to 2.2″ bearingcaps. Heat-treated threads and casting for durability.
-
$49.00
Features Six tools in one for exceptional versatility and value. Kitconsists of three forks and two handles; one for hammering,the other for use with an air hammer (.401″ shank). Allforks are threaded to interchange with either handle. Forksare heavy-duty forgings, handles are heat-treated alloysteel.
-
$55.00
Features Step Design Helps Keep Tool from BouncingBack When Separating Ball Joints, SteeringDampeners, Tie Rods, Pitman Armsand Other Applications.Six tools in one. Three forks and two handles. Forks arethreaded to interchange with either handle. One handle forhammering; one for use with an air hammer (.401? shank).Forks are heavy-duty heat-treated, alloy steel forgings.Steps can be resharpened…
-
$119.00
Features The 20% Thicker Fork Design Provides Extra Lift WhenReplacing Worn Out Ball Joints, Pitman Arms, Pickup TrackBars and Other Includes five forks: 11/16″, 15/16″, 1-1/8″, 1-7/16″and 1-5/8″. Forks are threaded to interchange with eitherthe handle for hammering or the pneumatic driver (.401Shank) and a 6-1/4″ extension that works with either handleto provide extra reach.
-
$22.00
Features Stepped design helps keep tool from bouncing back. The 18530is used to replace worn out ball joints and to remove CVdrive shafts on FWD vehicles. The tine opening is 15/16″.These heavy-duty tools are drop forged and heat-treated forlong use. Steps can be sharpened if needed.
-
$26.00
Features Ball Joint SeparatorTool separates ball joints from steering knuckles. Forged towithstand impact usage. Length: 12″
-
$27.51
Features Fits BMW Bottom ball joint
-
$92.00
Features For disassembling even the most seized U-joints inminutes on most intermediate trucks, school buses, farm andlight industrial vehicles. Eliminates dangerous vice and socket or hammeringmethods. Reduces risk of damage to the driveshaft, yokes,joints or bearing cups. U-joints with bearing cups 1.25″ to 1.7″ OD.
-
$56.00
Features Removes the front suspension ball joints quickly, safelyand efficiently without damage 19mm (3/4″) hexagon drive spindle can be turned with awrench or impact wrench Hex on the main socket body is for holding in placewhile servicing Applications: Impreza 1993-2014, Forester 1998-2015,Legacy 1994-2014, Outback 1994-2014, Baja 2003-2006 & Saab9-2X 2005-2006
-
$66.00
Features Separates the lower control arm ball joint from thesteering knuckle. Services 2007-2013 Ford, Lincoln &Mercury models. Product details: Fork I.D. = 33.5mm,Fork O.D. = 56.5mm, Hex Head = 19mm, Hex Nut = 25.35mm (1?).
-
$55.00
Features Services Sprinter Ball Joints. Black Finish With 3/4″ SquareDrive. Od–68Mm, Id–50Mm Services Sprinter BallJoints 3/4″ Square Drive Od–68Mm, Id–50Mm BlackFinish 6 Pin Design