Showing 61–80 of 582 results
-
OT OTC OT7927A Steering Wheel Remover/Lock Plate Compressor Set
$99.00Features Included with the puller are four sets of cap screwsneeded for the various thread requirements. A steering wheel lock plate compressor is also includedto compress the steering wheel lock plate to remove orinstall the snap ring. A steering pivot pin remover for Saginaw steeringcolumns completes the set, and it all comes in a convenientplastic…
-
OT OTC OT7835 Ford Rear Main Oil Seal Kit
$524.00Features Works on 1994-2003 7.3 diesel engine in Ford 3/4-and 1-tontrucks. A complete kit with the tools you need to properlyremove and install the rear main oil seal and wear ring onthe crankshaft. Eliminates makeshift methods of seal removaland installation that could damage new seal or crankshaft.
-
OT OTC OT7834 Ford 4.0 Rear Main Seal Remover/Installer
$161.00Features This installer works on crankshaft rear oil seals that comewith or without a metal wear sleeve.Designed for use on 1993-1997 Aerostar or 1993-2011 Rangerand Explorer with 4.0L V6 engine.
-
OT OTC OT7822A GM Torsion Bar Unloading Tool C-Frame Tool
$154.00Features GM’s K-35 series trucks with the heavy-duty chassis requireheavy-duty tools to deal wih the larger torsion bar. Thelarger C-frame opening on the 7822A accommodates thebeefed-up torsion bar on these trucks holding it in placewhile you loosen or tighten the adjusting nut. Also works on1988 and newer GMC and Chevrolet 1/2- 3/4- and 1-tonpickups; S-10…
-
OT OTC OT7816 Ford Torsion Bar Tool
$325.00Features Before servicing a torsion bar on 1995?2001 FordExplorer and 1998?2001 Mercury Mountaineer vehicles, youmust first contain the bar to avoid possible damage.
-
OT OTC OT7704 Adapter Set for 4WD
$108.00Features This kit is used with ball joint service kit No. 7249 toremove and install upper and lower ball joints on1967-current 1/2- and 3/4-ton 4WD vehicles having the Dana44front axle (found on Ford, GM, Dodge, IHC and Jeepvehicles).
-
OT OTC OT7703 10 Lbs. Slide Hammer
$119.00Features This heavy-duty slide hammer puller gets tough with thosereally stuck parts. Heat treated, 24″ long, and a 5/8″-18 threaded end to adapt to any ofOTC’s pulling attachments. Ten-pound hammer
-
OT OTC OT7649A Fuel Injector Cleaning Kit
$460.00Features Everything you need to begin direct injector cleaning anddecarbonizing. Includes OTC7448A Fuel Injection Cleaner Canister whichprovides you with a heavy duty stainless steel container foryears of service Manual showing all the information you need to work onvirtually all vehicles manufactured between 1997 – 2013 inthe US Includes a spring lock coupling adapter, several quickconnect…
-
OT OTC OT7503 Outer Tie Rod Remover
$85.00Features Works on FWD and RWD import and domestic vehicles. Up to 5 tons of force can be applied.
-
OT OTC OT7502 4WD Front Spindle Puller
$88.00Features This puller enables you to remove the front spindle onlight-duty 4WD trucks. It?s designed for full-size Ford, GM,International, and Jeep pickups with Dana front axles. Alsoworks on Ford Ranger and Bronco II.5/8″ fine thread makes it ideal for use with our No. 1155slide hammer.Fits spindle thread sizes 2″-16, 1-5/8″-16 and 38 mm-1.5.
-
OT OTC OT7501 Inner Tie Rod Wrench
$118.00Features Replaces existing products with multiple adapters. Itsunique cam design covers sizes from 33 to 41 mm hex, 2flats, round or any style rack ends. Since the wrench fitsall the way to the inner side of the tie rod link it makesit easy for the technician to unscrew the tie rod link forreplacement.
OTC Tool: The most popular power tool brand for automotive enthusiasts
OTC Tool is a vehicle and equipment manufacturing company founded by Godfrey Kaplan, who operated a small machine shop in Owatonna, Minnesota. By 1934, OTC was selling mechanic's tools to farmers and service stations.
In 2012 OTC became a Bosch brand and has been integrated into the Bosch Automotive Aftermarket division By supplying the aftermarket and repair shops worldwide.
The products of OTC include automotive fuel maintenance equipment, electronic vehicle diagnostics, and a complete selection of automotive service hand tools.
Vermont Tool Company sells top-rated OTC tools on the market
Vermont Tool Company is a popular tools retailer in the USA which stocks different types of branded tools and sells them at affordable prices. You can buy top-rated OTC tools for your automotive enthusiasts from Vermont Tool Company. Here is a list of OTC tools you can buy from VTC.
OBD diagnostics scan tool
OBD stands for onboard diagnostics, so an OBD diagnostic scan tool refers to a vehicle diagnostic device that reads the error memory and data recorded on your automotive systems.
OBD diagnostic scanners manufactured by OTC Tool can save you time and money. It can plug into your car's onboard diagnostics system port and pull the error codes to see what's happening. Vermont Tool Company offers different OBD diagnostic scanners at reasonable prices with a sustainable warranty.
Ball joints service kit
Replacing ball joints is time-consuming without a ball joint service kit. Ball standard service kits remove and install press-fit ball joints instead of taking the vehicle's control arm. The OTC ball joint service kit can also be used to remove or install U-joints.
This tool is designed with drop forged steel with solid and dependable to provide lifetime service. Vermont Tool Company provides ball joint service kits with different brands and models that help you choose the best one.
Fuel injector cleaning kit
Fuel injector cleaning kit clogged fuel injectors cause sluggish engine performance, poor fuel economy, and a rough idle. This injector cleaning kit helps you solve various problems. It can work on a wide range of domestic and imported engines.
This injector kit also helps you do low and high-pressure fuel system tests. It can work with your shop's pressurized air supply for more powerful cleaning. It can remove carbon from intake and combustion systems.
Collision repair sets
OTC collision repair sets contain 4 to 10-ton capacity and have the power and components to quickly and safely move damaged metal. This tool has a heavy-duty, single-speed, hand-powered hydraulic pump. You can exert hydraulic force where it needs to lift, spread, bend, and straighten steel or aluminum parts.
It can handle the high-force jobs you may face daily in collision repair, trailer maintenance, and industrial service. Vermont Tool Company offers all kinds of collision repair sets made by OTC at affordable costs.
Jack Stands
Jack stands are lightweight tools supporting a vehicle after lifting a jack. Its broad pyramid foot base can give added strength and stable support. This tool is made of high-grade forged steel with a welded frame design to provide long-lasting services.
This tool can handle many vehicles, including small cars and light-duty trucks. Vermont Tool Company sells different jack stands made by OTC at reasonable prices with an extended warranty.
Lift transmission jack
The lift transmission jack is different from the conventional hydraulic floor jack or bumper jack. It takes position centrally under the automation and lifts the transmission through a lifting platform that is attached to the transmission jack lift frame.
OTC tool manufactures the best transmission jacks of different models and categories that contain an adjustable head for aligning with transmission bolt patterns and pins. Also, these heavy-duty jacks include casters for mobilization and straps or chains for secured equipment during movement.
Snap ring pliers set
Snap ring pliers are hand tool sets specially used to install and remove snap rings. This tool is suitable for easy usage and spring-loaded for smooth work. This heavy-duty pliers set ensures quality services.
There are two types of snap ring pliers set: internal and external pliers set. The external pliers set is mainly designed to install external sap rings in the outside slot of the shaft or dowel. On the other hand, internal pliers set is usually used for inner snap ring installation inside the hollow or cylindrical housing.
Spark plug remover kit
A spark plug remover kit is usually used to keep the spark plug in the first place. This tool helps you prevent breakage by locking the plug porcelain core to the plug hex, which allows it to turn as one complete unit, unlike similar tools that help to remove the spark plug once it has been broken.
The spark plug remover kit will also help pull the porcelain core when the plug hex is removed. Vermont Tool Company sells different-sized and categorized OTC spark plug remover kits at competitive prices.
Puller set
Puller sets are tools that remove parts such as bearings, pulleys, or gears from a shaft. Puller sets typically have two or three legs that circle the back or inside of a function. This tool also contains a forcing screw that can center up against the end of a shaft.
Vermont Tool Company provides different puller sets such as bearing splitter plates, 2 and 3 arms bearing pullers, internal bearing pullers, bar type pullers & slide hammer pullers.
Important FAQs of OTC tool
Are OTC tools a good brand?
OTC Tool is a good brand that produces heavy-duty and long-lasting products. People rely on this brand for their high-intensity projects.
Does Bosch own OTC tools?
In 2012, OTC became a Bosch brand and integrated into the automotive service solution business unit of Bosch's aftermarket business division.
Are otc tools made in the USA?
Yes, OTC tools are manufactured in Owatonna, Minnesota, which is in the United States.
What is the warranty for my otc tool?
OTC stands with its diagnostic tools with a lifetime warranty and a continued pledge to give you complete diagnostics coverage.
OTC is the most famous power tool manufacturer in the US for vehicle enthusiasts. Vermont Tool Company offers numerous OTC tools for your automotive enthusiasts at reasonable costs. I hope this article gave you the best guideline for automotive power tools. Now you can go forth and buy them.