Showing 361–380 of 408 results
-
$63.00
Features Kit includes pressure tester connector with 3 adapters tofit almost all cooling systems. 3 adapters cover all diameters from 17mm to 40mm. Elastomeric adapters with wide durameter ratings. All adapters with O-rings. Connector works with all standard pressure tester pumps. Connector manufactured from aluminum, steel & durableplastic
-
$108.00
Features Removes and Installs the climate control blower motor. Services Volvo: S60L (2007-2016), S80 (2007-2016), S80L(2008-2016), V60 (2008-2016), V60 Cross Country (2008-2016),V70 (2008-2016), XC60 (2008-2016), XC70 (2008-2016), S60(2011-2016). Land-Rover: LR2, Range Rover Evoque
-
$71.00
Features Breaks loose crank Bolts that other tools can’t, foundon Toyota & Honda vehicles Counter-weighted design forhigh torque applications OAL 89mm w/ 1/2″ squaredrive
-
$13.00
Features Removes & installs cylinder end stopper on ’04 – ’09 LexusRX330 & RX350, plus ‘004 – ’07 Toyota Highlander. Allows steering rack to remain in vehicle without usinga screwdriver and hammer and prevents damage to cylinder. Use with 3/8″ square drive tools.
-
$29.00
Features 14mm thin-wall 12-point socket features a swivelsquare-drive to access spark plugs found on BMW N54, N55,N63, Benz E90 plus some Minis and Infinitis. Rubber insert holds plug. 3/8″ square drive.
-
-
$46.00
Features For easy access to small metric hex fasteners found on HoseClamps and other applications. Rugged cable shaft handles high torque applications. Molded plastic handle with hang hole. 4 hex sizes: 5mm, 6mm, 7mm, 8mm.
-
$38.00
Features Hose Clamp Pliers with a 30mm circle head andmulti-directional diamond pattern For a wide application range, including: Radiator hoseclamps, Transmission cooler lines, Air intake clamps andMore! Spring loaded to open up to 55mm Features a 30? degree bend for easier access Extra-long (13.5″ / 34.29cm) Cushion grips
-
-
$10.00
Features Special adapter fits the Oil Filling location on FordEscape (2013+), Mazda 3 (2014+), 6 (2013+) & CX-5 (2013+)models Use with CTA #7471 Funnel All plastic design with O-Ring Fits CTA #7484 Plastic Extension. O.D. of working end:34.00mm
-
$74.00
Features Removes & installs Fuel Tank Lid on many Toyota & Lexusvehicles from 2004 & up. 9-slot design with 173mm OD & 143mm ID. Use with 3/8″ square drive or 3/4″ hex drive tools.
-
$77.00
Features Removes & installs Fuel Tank Lid on some Mercedes Benz &BMW’s. Heavy-duty tool with 4 point design with 145mm OD &116mm ID mates perfectly with the ring without damage. Use with 1/2″ square drive tools.
-
$81.00
Features Removes & installs Fuel Tank Lid on Mercedes Benz W164, W251vehicles. Heavy-duty tool with 21 engagement points, 190mm OD &145mm ID mates perfectly with the ring without damage. Use with 1/2″ square drive tools.
-
$10.00
Features Removes new, plastic drain plugs without damage. Services1.8L & 2.0L gas turbo 2015 & up VW & Audi vehicles. All-plastic patented tool mates perfectly with drainplug and wide thumb-grip allows proper torque.
-
$14.00
Features #10 Polydrive bit end services camshaft adjuster bolts,where clearance is critical, as found on VW/Audi 2.0L turboBPG & BPY engines. 53mm long with 1/2″ square drive.
-
$37.00
Features Adjusts the Timing Chain through the Camshaft Adjuster. Works on various Audis from ’05 & up including A6, A8,A8L, Q7, RS4, S5, S6, S8. Aluminum die-cast construction with 24mm hex drive.
-
$46.00
Features For removal and installation of 4/3-way centrall valve forcamshaft adustment on 1.8 & 2.0 generation III TFSI engines. 3 sizes with unique 2-pin positions, all with 3/8″square drive. Packed in blowmold case.
-
$13.00
Features Releases the Lower Ball Joint on Audi A4 (’07 & up), A5 (’09& up), A6 (’11 & up), A7 (’10 & up), Q5 (’10 & up). Allows the ball joint to be turned after releasing thepinch bolt. Features 1/2″ square drive with 27mm hex & 18mm diameterhole.
-
$27.00
Features Provides Access To Recessed Areas With Extra Long Bolts AsFound On Some Bumper, Rear Lamp And Door Hinge Fittings.Also For Diesel Glow Plugs And Benz C-Class (W240) RearBumper Covers, Plus Twin-Turbo Bmw Valve Cover Bolts. Both120Mm Long With Deep Internal Socket And 3/8″ SquareDrive. 120Mm Long 120Mm Long Deep Internal SocketClears Extra-Long Bolts 3/8″…
-
$19.00
Features High Pressure Rail Adapter Socket. Removes and installs FuelInjector Adapter from the High Pressure Rail to serviceO-rings. For International Trucks including DT 466 / 570, HT 570.1″ outer hex design & 20mm diameter. 1/2″ square drive.
CTA Manufacturing has been a prominent player in the automotive tools and equipment industry for decades, renowned for its commitment to precision and innovation. Founded with a vision to provide top-tier solutions to automotive professionals, CTA Manufacturing has continually evolved to meet the changing needs of the industry.
Today, CTA Manufacturing offers a wide range of products, from oil filter wrenches that simplify maintenance to advanced diagnostic tools that aid in vehicle troubleshooting. Their specialty equipment is designed to enhance efficiency and effectiveness in automotive maintenance and repair.
At Vermont Tool Company, we proudly offer an extensive selection of CTA Manufacturing products to meet your automotive tool needs. Whether you're a professional mechanic or a DIY enthusiast, trust in CTA Manufacturing to provide the quality and reliability you require for your automotive projects.