Showing 901–920 of 975 results
-
CM CTA MANUFACTURING CM1806 Ford Crankshaft Vibration Dampener Alignment Tool
$18.00Features Services Ford EcoBoost B-Max 1.6L engines. Comparable to Ford Factory Tool 3303-1550. Use in conjunction with #1026.
-
CM CTA MANUFACTURING CM1800 Toyota/Nissan Fuel Line Disconnect Tool
$13.00Features Disconnects 5/16″ main fuel line from fuel rail onToyota & Nissan. Services Toyota Corolla, Celica, Camry, Echo, Solara,Sequoia, Rav4, Prius, MR2, Matrix, Highlander, Tundra, ScionxA, xB & TC. 2004+ Nissans w/ 5/16″ fuel rail Hinged design accesses hard to reach areas.
-
CM CTA MANUFACTURING CM1724 Toyota Front Hub Nut Socket
$46.00Features Removes & installs front hub lock nut on 2007 & Up 2WDToyota Trucks 3/4″ Drive Comparable to Toyota Factory Tool 09318-12010-8PIN and09602-60010
-
CM CTA MANUFACTURING CM1722 Audi Setting Gauge
$49.00Features Sets camshaft position sensor rotor ring used duringintstallation of timing chains on Audi 4.2L V8 5v Engines:Audi A6 (2005-2007), Allroad Quattro (2003-2005), & S4(2004-2009)
-
CM CTA MANUFACTURING CM1720 BMW Front Wheel Hub Bearing Tool
$118.00Features Services stub axle BMW, including: E28, E36, E46, E53,E60, E61, E67, E83, E85,E86, E90, E91, E92. M30X1.5 Threads Comparable to BMW Tool 83300391 907
-
CM CTA MANUFACTURING CM1137 Mini Cooper Fuel Line Disconnect Tool
$32.00Features Removes the low pressure fuel line that supplies thehigh pressure fuel pump, without damage. Services ’07 – ’13Mini’s.
-
CM CTA MANUFACTURING CM1096 4 Pc. Injector Nozzle Puller Set
$74.00Features Removes damaged Benz Diesel injectors as found on Sprinter &E-Class engines. Includes Puller Tool, 29mm Slotted Injector Wrench, 10mmHex Tamper Bit for removing center piece of injector andsupport rings.
-
CM CTA MANUFACTURING CM1094 Benz CDI Engine Common Rail Injector Puller
$131.00Features Removes stubborn injectors on Benz CDI engines withoutdisassembling the cylinder head. Includes slide hammer, puller jaw & set of threadedadapters, including swivel adapter. Applications include: Mercedes CDI Engines 611, 612,613, 646, 647, 648. Packed in blow mold case.
-
CM CTA MANUFACTURING CM1092 Ford Valve Spring Compressor
$45.00Features Compresses Valve Springs Without Having To Remove The Head.Forged Construction With 3/8″ Square Drive And Built-InJaws. Services 1991 And Up Ford 4.6L, 2-Valve, V-8Engines. Compresses Valve Springs Without Having ToRemove The Head Forged Construction With 3/8″ SquareDrive And Built-In Jaws Services 1991 And Up Ford 4.6L,2-Valve, V-8 Engines Black Finish Forged Construction
-
CM CTA MANUFACTURING CM1089 VW/Audi Fuel Pump Remover / Installer
$69.00Features Fuel pump wrench removes and installs fuel pump onVolkswagen and Audi vehicles. Applications include Audi: A4 (2002-2004 AWD), A6(1999-2004). Volkswagen: Passat (1998-2005). Extra-long offset handle for proper reach and access.All steel construction.
-
CM CTA MANUFACTURING CM1084 Mercedes Ball Joint Socket – 6 Lug
$55.00Features Services Sprinter Ball Joints. Black Finish With 3/4″ SquareDrive. Od–68Mm, Id–50Mm Services Sprinter BallJoints 3/4″ Square Drive Od–68Mm, Id–50Mm BlackFinish 6 Pin Design
-
CM CTA MANUFACTURING CM1082 Mercedes Ball Joint Socket – 4 Lug
$59.00Features Services Benz M-Class (W163/W164) Ball Joints. Black FinishWith 3/4″ Square Drive. Od–63Mm, Id–50Mm Services BenzM-Class (W163/W164) Ball Joints 3/4″ SquareDrive Od–63Mm, Id–50Mm Black Finish 4 Pin Design
-
CM CTA MANUFACTURING CM1079 4 Pc. Universal Radiator Test Kit
$63.00Features Kit includes pressure tester connector with 3 adapters tofit almost all cooling systems. 3 adapters cover all diameters from 17mm to 40mm. Elastomeric adapters with wide durameter ratings. All adapters with O-rings. Connector works with all standard pressure tester pumps. Connector manufactured from aluminum, steel & durableplastic
-
CM CTA MANUFACTURING CM1063 Toyota Steering Rack Tool
$13.00Features Removes & installs cylinder end stopper on ’04 – ’09 LexusRX330 & RX350, plus ‘004 – ’07 Toyota Highlander. Allows steering rack to remain in vehicle without usinga screwdriver and hammer and prevents damage to cylinder. Use with 3/8″ square drive tools.
-
CM CTA MANUFACTURING CM1051 4 Pc. Flex Nut Driver Set
$46.00Features For easy access to small metric hex fasteners found on HoseClamps and other applications. Rugged cable shaft handles high torque applications. Molded plastic handle with hang hole. 4 hex sizes: 5mm, 6mm, 7mm, 8mm.
-
CM CTA MANUFACTURING CM1048 30MM Large Hose Clamp Pliers
$38.00Features Hose Clamp Pliers with a 30mm circle head andmulti-directional diamond pattern For a wide application range, including: Radiator hoseclamps, Transmission cooler lines, Air intake clamps andMore! Spring loaded to open up to 55mm Features a 30? degree bend for easier access Extra-long (13.5″ / 34.29cm) Cushion grips
-
CM CTA MANUFACTURING CM1031 Audi Ball Joint Socket
$13.00Features Releases the Lower Ball Joint on Audi A4 (’07 & up), A5 (’09& up), A6 (’11 & up), A7 (’10 & up), Q5 (’10 & up). Allows the ball joint to be turned after releasing thepinch bolt. Features 1/2″ square drive with 27mm hex & 18mm diameterhole.
-
CM CTA MANUFACTURING CM1027 Hight Pressure Rail Adapter Socket
$19.00Features High Pressure Rail Adapter Socket. Removes and installs FuelInjector Adapter from the High Pressure Rail to serviceO-rings. For International Trucks including DT 466 / 570, HT 570.1″ outer hex design & 20mm diameter. 1/2″ square drive.
-
CM CTA MANUFACTURING CM1024 High Pressure Oil Rail Ball Tube Installation Tool
$18.00Features Installs Oil Rail Ball Tubes in Oil Manifold found on2004.5 – 2007 Powerstroke 6.0L Engines Also works as alignment tool Size: 22.75mm hex w/ 20mm I.D. hole Use with 7/8″ hex socket
-
CM CTA MANUFACTURING CM1013 HENN Clamp Pliers
$24.00Features Designed for the loosening or opening of HENN clamps foundon coolant hoses & charge air hoses The T-Handle features a removable working end Working end can be adjusted for an angled (90?) andstraight (0?) approach when HENN clamps are difficult toaccess Applications: VW, Audi, BMW, Fiat, Ford, Kia, Lexus,Mazda, Mercedes, Nissan, Porsche, Toyota, Volvo…
