View cart “TA TOOL AID TA18590 Metri Pack Terminals Release Tool Kit” has been added to your cart.
Showing 1–20 of 111 results
-
$8.00
Features Metri Pack Release Tools are available in two sizes andare designed to easily disengage the male terminal from thefemale housing. Just slide the tip into the housing over the terminaland depress the locking tab to remove the terminal from theconnector. Narrow Blade. For use with 150, 180 & 800 SeriesTerminals (18592) For use with 56,…
-
$64.00
Features CoolSmoke Fluid with UV Dye Pin-points leaks faster and more accurate than anyother leak detection fluid Designed specifically for use with the MotorVac CoolSmoke System, but works with other TOP BRANDS as well! Environmentally friendly MotorVac CoolSmoke Fluid with UV Dye 6.8oz (200ml) Bottle
-
-
$161.00
Features Gives fast, accurate power steering analysis. Test for defects in power steering pumps, gears andlines. Large heavy duty gage reads from 0-2,000 PSI and 0-140BAR. reads from 0-2,000 PSI and 0-140 BAR. Use to rule out power steering problems before expensivesuspension or steering linkage problem is attacked. Includes 13 adapters. Supplied with instructions in…
-
$62.00
Features Fast and easy to use. Threads into the Oxygen Sensor Port. Kit includes 12MM and 18MM adapters to fit most domesticand imported vehicles. Gage measures 2-1/2″ diameter andhas dual scale: 15 PSI and 1.00KgCm2. Hose is 41″ long – No need to tap into exhaust systemthen reseal holes afterwards. Complete withinstructions.
-
$62.00
Features Use to seal metal lines once disconnected Prevents fluid leaks and contamination during service For use on fuel, brake, A/C, banjo, power steering andtransmission lines Use with all automotive fluids Supplied with two each of four Stoppers: Banjo Bolt,5/16″, 3/8″ & 1/2″ Adjusts and locks to 3 positions Installs in seconds
-
$237.00
Features S.U.R.&R.’s PS2000 Power Steering Line Repair Kit allows youto create high and low pressure lines for hundreds ofdifferent line Types sized 3/8 or 5/16″. 85% coverage foreign and domestic Use for power steering lines, clutch, industrial andheavy duty applications 37 piece kit includes 5 hoses, 20′ of UltraBEND tubing(10′ each 5/16 and 3/8″) and…
-
$30.00
Features Double Braided Hose Safe for Both Low and High-PressureLines(up to 6,000 PSI burst pressure, 1,500 PSI working pressure) Features Double-Seal Technology with O-Ring andInterchangeable Ferrule
-
$30.00
Features Double Braided Hose Safe for Both Low and High-PressureLines(up to 6,000 PSI burst pressure, 1,500 PSI working pressure) Features Double-Seal Technology with O-Ring andInterchangeable Ferrule
-
$55.00
Features Specially Designed for Removing Plastic Oil Drain PlugsWithout Damaging the Plug 4 pc. set for removing plastic engine oil pan drainplugs on many late model Audi, BMW, Ford, Lincoln andVolkswagen Specially designed to slot in and release the drain plugwithout causing damage Maximum grip on plug surface provides for simple, easyremoval Includes convenient storage…
-
$115.00
Features This high-tech, user friendly Oxygen Sensor Tester/Simulatormodel ST05 from General Technologies Corp/Sheffield Researchsports a simple interface to perform diagnostic tests andmeasurements on any Oxygen Sensor and to quickly determinewhether or not an Oxygen Sensor is actually defective and inneed of replacement. It is designed to be used both, as astand alone tool or as…
-
$524.00
Features Works on 1994-2003 7.3 diesel engine in Ford 3/4-and 1-tontrucks. A complete kit with the tools you need to properlyremove and install the rear main oil seal and wear ring onthe crankshaft. Eliminates makeshift methods of seal removaland installation that could damage new seal or crankshaft.
-
$64.00
Features 2 tool set Cast metal design Removes belts without damaging Installs and removes stretch fit belts Includes an install tool along with a removal tool Designed to be used for installing and removing stretch fit belts
-
$181.00
Features Removes and installs camshaft and crankshaft seals on carsand truck/van/suv’s without damage.Includes a puller coupled with specialized puller legs thathook the seal for quick and easy removal.The interchangeable seal install adapters are designed foruse with the cam or crank bolt. Kit services seal sizes of21.5mm to 64mm. Same as PBT Tools 70960
-
$178.00
Features Removes fuel injectors from engine. The puller legsalign around the injector base and the collar is slid downto firmly grip the injector. A slide hammer attaches to thepuller, which is used to pull the injector from its seat.The injector puller threads onto slide hammers with 5/8″-18thread, including most OTC slide hammers. Similar to 310-206….
-
$144.00
Features Installs the front seal and wear ring on crankshaft Similar to OE part number 303-1259
-
$323.00
Features Removes the front seal and wear ring from crankshaft.Similar to 303-1260.260. Applications include:2008-2010 Ford F-250, F350, F450, F-5506.4L Ford Powerstroke enginesVT365-MaxxForce7Navistar International
-
$196.00
Features The OTC 6887 Crankshaft Front Seal and Wear RingInstaller installs the front seal and wear ring oncrankshaft. It’s designed to eliminate lip flare on the wearsleeve and installs the seal properly. Use OE part number303-1158 for 4.5L installation. Applications include Ford vehicles using the followingengines:2003-2007 F-250, F350, F-450, F-550, Excursion2004-2007 F-650, F-7502004-2010 E150, E-250,…
-
$284.00
Features Removes the front seal and wear ring from crankshaftSimilar to OE part number 303-762
-
$405.00
Features Removes the rear seal and wear ring from crankshaft Similar to OE part number 303-771