Showing 1–20 of 117 resultsSorted by popularity
-
TA TOOL AID TA18590 Metri Pack Terminals Release Tool Kit
$11.00Features Metri Pack Release Tools are available in two sizes andare designed to easily disengage the male terminal from thefemale housing. Just slide the tip into the housing over the terminaland depress the locking tab to remove the terminal from theconnector. Narrow Blade. For use with 150, 180 & 800 SeriesTerminals (18592) For use with 56,…
-
TA TOOL AID TA33600 Exhaust Back Pressure Tester
$69.00Features Fast and easy to use. Threads into the Oxygen Sensor Port. Kit includes 12MM and 18MM adapters to fit most domesticand imported vehicles. Gage measures 2-1/2″ diameter andhas dual scale: 15 PSI and 1.00KgCm2. Hose is 41″ long – No need to tap into exhaust systemthen reseal holes afterwards. Complete withinstructions.
-
SL SCHLEY PRODUCTS SL64400 Toyota 3.4L Harmonic Balancer Holder
$94.49Features This harmonic damper pulley holding tool has been developedto aid in the removal and installation of the crank bolt on3.4L V6 engines. These damper pulleys need a special toolto hold the pulley stationary for the center bolt to beremoved. The bolt is extremely tight and without the #64400removal is difficult at best. In replacing…
-
OT OTC OT6760 Diesel Fuel Filter Wrench
$22.00Features The new 6760 Fuel Filter Wrench is designed to remove andinstall the fuel filters on the Ford 6.0L & 7.3L PowerStroke diesel engines as well as International / Navastardiesel engines. Low profile design for easy access in tight areas. Reversible Six lug design provides the convenience oftwo sizes in one tool. Light weight low…
-
OT OTC OT6725 GM Belt Tensioner Compressor
$285.00Features Makes replacing engine drive belts and startergenerators easier. This tool compresses the belt tensioner spring duringengine drive belt replacement and starter generatorservicing. Applications include 2.4L GM eAssist engines found in:2012 – 2016 Buick LaCrosse, 2012 – 2017 Buick Regal, 2011 -2014 Chevrolet Malibu
-
-
TA TOOL AID TA34650 Power Steering Tester In Molded Plastic Storage Case
$175.00Features Gives fast, accurate power steering analysis. Test for defects in power steering pumps, gears andlines. Large heavy duty gage reads from 0-2,000 PSI and 0-140BAR. reads from 0-2,000 PSI and 0-140 BAR. Use to rule out power steering problems before expensivesuspension or steering linkage problem is attacked. Includes 13 adapters. Supplied with instructions in…
-
TA TOOL AID TA19700 8 Pc. Adjustable Fluid Line Stopper Kit
$66.00Features Use to seal metal lines once disconnected Prevents fluid leaks and contamination during service For use on fuel, brake, A/C, banjo, power steering andtransmission lines Use with all automotive fluids Supplied with two each of four Stoppers: Banjo Bolt,5/16″, 3/8″ & 1/2″ Adjusts and locks to 3 positions Installs in seconds
-
SU SUNEX TOOLS SU2850 7 Piece Oxygen Sensor Socket Set
$73.00Features Easily removes vacuum switches, oil pressure sending units,brake light switches, and oxygen sensors on most car models CR-MO alloy steel for long life 29mm pressure/ vacuum switch socket 7/8″ vacuum switch socket with 7.5mm gap 27mm oil pressure sending unit socket 7/8″ vacuum switch socket with 20.6mm gap 1-1/16″ and 1″ oil pressure sending…
-
SRR S.U.R & .R SRRPS2000 Power Steering Hose Replacement Kit
$245.00Features S.U.R.&R.’s PS2000 Power Steering Line Repair Kit allows youto create high and low pressure lines for hundreds ofdifferent line Types sized 3/8 or 5/16″. 85% coverage foreign and domestic Use for power steering lines, clutch, industrial andheavy duty applications 37 piece kit includes 5 hoses, 20′ of UltraBEND tubing(10′ each 5/16 and 3/8″) and…
-
SRR S.U.R & .R SRRPS16 3/8″ x 6″ Power Steering Hose
$24.00Features Double Braided Hose Safe for Both Low and High-PressureLines(up to 6,000 PSI burst pressure, 1,500 PSI working pressure) Features Double-Seal Technology with O-Ring andInterchangeable Ferrule
-
SRR S.U.R & .R SRRPS112 3/8″ x 12″ Power Steering Hose
$24.00Features Double Braided Hose Safe for Both Low and High-PressureLines(up to 6,000 PSI burst pressure, 1,500 PSI working pressure) Features Double-Seal Technology with O-Ring andInterchangeable Ferrule
-
SRR S.U.R & .R SRRFLS330 Fluid Stop Clamp Set
$29.00Features Prevents Messy Fluid Leaks, Perfect for Brake, Fuel, A/C,Transmission and More. Includes 4 sizes – Banjo fittings, 5/16″, 3/8″ and 1/2″
-
SRR S.U.R & .R SRRDPR350 Plastic Oil Drain Plug Removal Set
$51.00Features Specially Designed for Removing Plastic Oil Drain PlugsWithout Damaging the Plug 4 pc. set for removing plastic engine oil pan drainplugs on many late model Audi, BMW, Ford, Lincoln andVolkswagen Specially designed to slot in and release the drain plugwithout causing damage Maximum grip on plug surface provides for simple, easyremoval Includes convenient storage…
-
PM PERFORMANCE TOOL PMW9211 Metric Folding Nut Driver Set
$14.00Features Slim Aluminum handles durable, lightweight and easy togrip Convenient folding drivers store compactly Colorcoated wit laser etched markings Chrome vanadiumconstruction.(Metric) 5 to 12MM
-
OT OTC OT7835 Ford Rear Main Oil Seal Kit
$588.00Features Works on 1994-2003 7.3 diesel engine in Ford 3/4-and 1-tontrucks. A complete kit with the tools you need to properlyremove and install the rear main oil seal and wear ring onthe crankshaft. Eliminates makeshift methods of seal removaland installation that could damage new seal or crankshaft.
-
OT OTC OT7832 Gm Torsion Bar Unloader
$111.00Features When servicing the lower control arm of the front suspensionon GM trucks, or replacing a torsion bar, it is necessary toremove the spring pressure from the suspension. In order todo this, a clamp, called a torsion bar unloader, can bepositioned on the frame and the torsion bar mount. The drivescrew of the torsion bar…
-
OT OTC OT7425 Stretch Belt Installation Tool
$66.00Features 2 tool set Cast metal design Removes belts without damaging Installs and removes stretch fit belts Includes an install tool along with a removal tool Designed to be used for installing and removing stretch fit belts
-
OT OTC OT7196 Universal Crank & Cam Seal Service Kit
$195.00Features Removes and installs camshaft and crankshaft seals on carsand truck/van/suv’s without damage.Includes a puller coupled with specialized puller legs thathook the seal for quick and easy removal.The interchangeable seal install adapters are designed foruse with the cam or crank bolt. Kit services seal sizes of21.5mm to 64mm. Same as PBT Tools 70960
-
OT OTC OT6999 Fuel Injector Puller
$169.00Features Removes fuel injectors from engine. The puller legsalign around the injector base and the collar is slid downto firmly grip the injector. A slide hammer attaches to thepuller, which is used to pull the injector from its seat.The injector puller threads onto slide hammers with 5/8″-18thread, including most OTC slide hammers. Similar to 310-206….
