Showing 1–20 of 122 results
-

$83.00
Features Use to test spark plug circuits, electronic fuelinjection signals and idle air control circuits. Includesthe recessed in line spart testing apparatus: 8 Noid Lights for checking GM PFI, Ford TBI, GEO TBI,BOSCH PFI, GM TBI, GM SCPI, BOSCH 2 and GM MULTEC 2 2 IAC Test Lights for straight and 90? applications Quickly diagnose…
-

$35.00
Features Use with most types of compression testers May need additional adapters for attachment
-

$26.00
Features A must for testing newer vehicles with recessed sparkplugs Troubleshoots virtually all domestic and import cars,SUV’s & trucks Provides information not available with OBD II codereading devices Shows a duplicate view of the ignition spark
-

$277.00
Features Replace or Repair Transmission Oil Cooler Lines forVirtually any Vehicle Within MinutesUse to replace or make repairs on both 5/16″ & 3/8″lines Convenient, all-in-one kit pays for itself in as littleas one job Hundreds of domestic and foreign applications Perfect for damaged lines including rust, cracks,pinholes, and more Triple-walled rubber hose safe and durable;…
-

$121.00
Features Repair damaged heater lines including pinholes, cracks,kinks and more Covers most common SAE and metric lines including 1/2″,5/8″, 13mm and 16mm.3/4″ also available (sold separately). Make connections easily by hand; no specialty toolsrequired OE style hose easy to route On-the-car repairs made simple
-

$73.00
Features Superior 360? sealing for high-to-low pressure applicationsincluding fuel, A/C, and coolant lines. Includes 100 positive seal clamps with permanent, noleak seal Features durable CP360 Seal Clamp Pliers with protectivegrip handle Consistent, uniform seals prevent damage to hoseIncludes: K2978 1/4″ 360? Seal Clamp 10/Pkg. 10 K2980 5/16″ 360? Seal Clamp 10/Pkg. 10 K2982 3/8″ 360?…
-

$46.00
Features This unique tool was designed to reach down through theengine compartment in areas not easilyaccessed with conventional tools. This tool has a specific?clock? angle of the 6 point 19 mm endwith carefully calculated handle geometry enabling access tothe hydraulic dampener tensioner.These hydraulic tensioners can be found on the 2006 andlater Civic and many other…
-

$24.00
Features Used for rotating the crankshaft of Cummins equippedvehicles during servicing. Tool passes through the flywheel housing until itengages the ring gear. Use a 1/2 in. ratchet or breaker bar to turn the engineover. (Not for impact use). Supporting collar provides protection against wear tothe flywheel housing while turning the tool. Works on Cummins B…
-

$46.00
Features Chrome Vanadium Constructionhrome Vanadium Includes Storage Rail Sizes: (Hex) 9, 10, 12, 14 and 17mm; (Square) 7, 8, 11,13mm, 5/16”, 3/8”; (Female Square) 10mm; (Male Triangle)10mm, (Tamper-proof Triple Square) 16mm
-

$19.00
Features Easily removes harmonic balancer. Drop forged alloy steel. Assorted bolts. Helps stop damage to pulley and shaft. Includes 14 – Bolts: 3 – 5/16-18 x 3 in, 2 – 3/8-6 x 3in, 3 – 3/8-24 x 3 in, 3 – 8mm x 1.25 x 80mm, 3 – 10mm x 1.5x 75mm.
-

$84.00
Features Need to manually rotate an engine? This tool makes thejob easy. Just insert the tool into the flywheel housinguntil it engages the ring gear, then attach a 1/2″ squaredrive ratchet or breaker bar and turn. The toolsload-bearing collar provides friction-free operation whilerotating the tool in the housing. Works on Cummins B and Cseries diesel…
-

$94.00
Features Allows for engine oil pressure to be measured.Installs inplace of oil filter providing ports to attach oil pressuretester.Dual port for bottom or side testerconnection.Installs with 11/16? (17mm) hex drive socket. Fits GM 4.8L, 5.3L, 5.7L, 6.0L engines,1996-Present.Similar to J-42907
-

$208.00
Features Set includes tools to remove fuel injector sleeves,clean the injector bore and fuel galley, and installinjector sleeve cups. With the head removed, the slidehammer adapter can be installed to pull the injector sleeve.The brush set properly cleans the injector bore which isrequired for the fuel injector sleeve cup installer toproperly seat the cup. Similar…
-

$112.00
Features Unique design helps prevent breakage by locking the plugporcelain core to the plug hex allowing it to turn as onecomplete unit. Will also pull plug porcelain core if plug hex only isremoved. Detailed Instructions to maximize success rate.Works on: Ford 4.6L 3V V8 engines used in 2005-2008 Mustang,2006-2008 Explorer. Ford 5.4L 3V V8 engines…
-

$175.00
Features Removes transmission extension housing bushing. The toolis inserted through the bushing and the drive screw istightened to draw the bushing out of the housing. Similar to308-070. Applications include Ford Ranger transmissions:4R44E/4R55E5R55EA4LDC3T5OD1.5L EcoBoost, 2014-Later6R80, 5R55S, CD4E, ZF 6-speed, AW21, 4R70E/4R75ETransmissions
-

$120.00
Features Features a 1/2″ square drive opening in handle for extraleverage.Similar to OE part number 303-126
-

$73.00
Features Power Steering Evacuation Cap allows for removal of air fromthe power steering system when used with a vacuum pump. Airin the system can cause noise and premature pump failure. Fits various power steering pump reservoirs. Similar to 211-265.
-

$120.00
Features Designed to be used with EVAP system tester. Includes a male tank adapter and female cap adapterconnected by a 20″ hose. Applications include:2006-Later Chrysler/Dodge/Jeep vehicles1999-2003 Mitsubishi Gallant2001-2005 Mitsubishi Eclipse Spyder Similar to OE part number MLR-8382.
-

$46.00
Features Adapts to fuel system for use during pressure testingand diagnostic procedures. For use on 2003-Later 5.9L Cummins Diesel. Similar to OE part number MLR-9011.
-

$85.00
Features Installs the front crank seal with the cover on or offthe engine. The bolt is threaded into the crankshaft and the nut istightened to seat the seal. Similar to EN-50820 & EN48034. Applications: 2013-14 Cadillac ATS, 2014 Cadillac CTS,2013-14 Chevrolet Malibu, 2014 Chevrolet Impala and BuickRegal 2.0L and 2.5L engines.