- You cannot add "CV CAL-VAN CV934-22 T40 3/8" Dr Torx Bit Socket" to the cart because the product is out of stock.
Showing 1–20 of 62 results
-
CV CAL-VAN CV95700 Metric Stud Removal and Installation Kit
$52.00Features Specifically designed to make stud removal andinstallation easier Eliminates the potential for damage to studs othermethods often cause Thread sizes: M6 x 1, M8 x 1.25, M10 x 1.25, M10 x 1.5and M12 x 1.5 Supplied in a blow molded case
-
CV CAL-VAN CV95500 Stud Extractor
$262.00Features Removes studs even if only a few threads are exposed. Easily installs new studs without damage to threads. For thread sizes: 1/4″x20, 1/4″x28, 5/16″x18, 5/16″x24,3/8″x16, 7/16″x14, 7/16″x20, 1/2″x13, 1/2″x20, 9/16″x12,9/16″x18, 5/8″x11 and 5/8″x18.
-
CV CAL-VAN CV95400 In Line Dowel Pin Puller
$211.00Features New Dowel Pin Puller that extracts Dowels withoutthe use of a slide hammer. Fit the appropriate sized collet over the dowel,tighten the sleeve, Use outer sleeve and nut toextract the dowel. Can be used with air ratchet, or traditional ratchet. Elimination of the slide hammer saves cost as wellas effort and potential hand injury….
-
CV CAL-VAN CV94800 Universal Hub Puller
$108.00Features Tool will remove wheel hubs mounted on tapered axles andpress fit rear brake drums. Can be adjusted by legs to an 8-in. diameter boltcircle. Made of alloy steel and drop forged, this heavy dutytool has a center screw 1-in.-14 x 9-in. with a 1-1/8-in.hex head.
-
CV CAL-VAN CV91800 Rear Axle Bearing Puller
$74.00Features Set includes 3 bearing pullers with a range from 1″ upto 2-7/8″. Designed to remove flange type, semi-floating rear axlebearings in most late model, rear-whell drive cars and lighttrucks. Designed to capture rear axle bearings firmly. Durable blow-molded case included.
-
CV CAL-VAN CV91300 Strut Compressor Floor Mounted
$386.00Features Used to easily compress many of the strut assembliesfound on passenger vehicles, light trucks and SUV’s. Adaptive Spring Bracket with safety hooks, lowerclamping jaws and large base for safe one person use. Max spring compression capacity of 2,200 lbs. Min/Max spring diameters of 3″/9″
-
CV CAL-VAN CV90703 Dodge Front Hub Locknut Socket
$27.00Features Easily remove and install front wheel hubs without thestruggle and possible damage other methods usually cause 6-pin socket for an exact fit for Dodge/Ram trucks 1500- 5500 model years 2006 – 2014. Works with 6-pin holeversions only Heavy duty one piece construction with rust resistantfinish Utilizes a 3/8″ square drive
-
CV CAL-VAN CV907 Medium U-Joint Puller
$92.00Features For disassembling even the most seized U-joints inminutes on most intermediate trucks, school buses, farm andlight industrial vehicles. Eliminates dangerous vice and socket or hammeringmethods. Reduces risk of damage to the driveshaft, yokes,joints or bearing cups. U-joints with bearing cups 1.25″ to 1.7″ OD.
-
CV CAL-VAN CV904 Wheel Bearing Remover/Install Kit
$126.00Features R&R Was Never Easier and Faster! Front wheel bearing adapters replace wheel bearingswhile keeping the steering knuckle and strut assembly intact on the vehicle The set eliminates the need for front end alignment oncethe work is done. Use on front wheel drive cars and light trucks.
-
CV CAL-VAN CV86 Dual View WiFi Borescope
$127.00Features High resolution, multiple aspect dual camera with superbright adjustable LED flashlight on both lens. Compactcamera is only 5.7 mm in diameter by 58″ in length. 3 display modes: front camera, side camera and front andside camera simultaneously. Long, bendable cable (58″) is flexible yet rigid enoughto give users access into hard to view areas….
-
CV CAL-VAN CV84 WiFi Borescope
$113.00Features High resolution, multiple aspect camera (1920×1080,1280×720 and 640×480) with adjustable LED lighting. Compact camera is only 6mm in diameter by 35mm inlength, allowing user greater access. Long, bendable cable (58″) is flexible yet rigid enoughto give users access into hard to view areas. Lens and cableare IP97 certified, dustproof and waterproof in up to…
-
CV CAL-VAN CV82900 Double and Bubble Flaring Tool Kit Metric and SAE
$77.00This set contains the tools necessary to create single or double flares, as well as bubble flares on soft steel and copper tubing. Single & double flares 3/16″, 1/4″, 5/16″, 3/8″ and 1/2″ tubing. Bubble flares 4.75 mm, 6mm, 8mm and 10mm tubing. Includes mini tubing cutter (part #151).
-
CV CAL-VAN CV767 Ratcheting Copper Tubing Hose and PVC Cutter
$26.00Features Cuts industrial air hose, multi purpose hose, heater andwasher vacuum hose, non metallic fuel line hose, PVC pipe,battery cables, copper tractor trailer cables and nonmetallic air brake hose up to 1 1/2″ diameter. Features a quick release mechanism to quickly and easilyopen pliers for use. Ratcheting action makes cutting easy. Also features a locking…
-
CV CAL-VAN CV76 Deluxe Relay Tester and Kit
$158.00Features The 76 relay circuit tester is not simply a tool to test arelay. It is a tool that can test an entire circuitfrom the battery to the component in question. Through itsfunction it will also determine if the relayitself is functioning properly. This tool gives thetechnician the ability to instantly determine the problemwithin a…